AUDIO/VIDEO NTSC ANALOG CONNECTIONS
AUX 3 INPUTS
For more convenient Direct
playback connections use the
DPTV's Front Audio/Video Input
panel (located on the DPTV's right
front side panel). These Inputs
allow for quick and easy access,
PICTURE AND SOUND FROM PLAYBACK OF
CAMCORDER TAPE
|
| FRONT AUDIO/VIDEO JACKS |
AUX 3 | NTSC | AUX3 Inputs located on right |
|
| front side panel of DPTV. |
particularly for the playback of
Camcorder tape recordings.
BEGIN
1Connect the VIDEO OUT jack from the Camcorder to the AUX3 VIDEO IN jack on the DPTV.
2Connect the AUDIO OUT jacks R(ight) and L(eft) from the Camcorder to the AUX3 AUDIO IN jacks on the DPTV.
3Press the “ext input” button on the remote (or the Source button on the DPTV’s local keyboard) to select the AUX3 Audio/Video Inputs on the DPTV.
4 Turn the Camcorder ON and |
DTV
power status
alt audio | freeze |
sleep | ext input |
analog format
1/3 Analog
DTV
AUX3 | VIDEO IN | |
| (YELLOW) | |
VIDEO IN | AUDIO IN | |
L | (RED/WHITE) | |
|
| |
AUDIO IN | 1 | 2 |
R | ||
| 4 |
|
mute
channel
+
volume
+
| AUDIO/VIDEO |
3 | OUTPUT JACKS |
ON CAMCORDER |
CAMCORDER
press PLAY to view the tape on |
the DPTV.
STOP
If you have a single (monaural) Audio Output Camcorder, "Y" connectors are available to complete your connection. Contact your dealer, or our Parts Information Center
AUDIO/VIDEO OUTPUTS
T he Audio/Video Output jacks
on the DPTV can be used to
record TV programs on VCRs which have Audio/Video Input jacks. To use the Audio/Video
Outputs for program recording:
BEGIN
PICTURE AND SOUND BEING RECORDED ON VCR | REAR OF DPTV | ||
NTSC |
|
| 1 2 |
|
| ANALOG | |
| AUDIO OUT | AUDIO INPUT | |
ANALOG |
| AUX 1 | AUX 2 |
|
|
| |
| L |
| L |
TV ANT/CABLE |
|
|
|
| R |
| R |
|
|
| |
AUX 1 AUX 2 | VIDEO OUT | VIDEO INPUT | |
1 Connect the VIDEO OUT jack from the DPTV to the VIDEO IN jack on the VCR.
2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the
DPTV to the AUDIO IN jacks on
the VCR.
3 Press the “Analog” command
VIDEO OUT |
|
(YELLOW) |
|
| OUT |
AUDIO/VIDEO INPUT |
|
JACKS ON VCR | ANTENNA |
| IN |
OUT
VIDEO
IN
OUT
R AUDIO L
IN
AUDIO
OUT
(RED/
WHITE)
button on the remote (or the Source button on the DPTV’s local
keyboard) to place the DPTV in
the NTSC mode.
Select the channel on the DPTV
that you want to record.
4 Turn the VCR ON. Put a cassette tape in the unit and place the VCR in the RECORD mode.
STOP
|
|
| mute | 4 |
|
|
| channel | |
|
| DTV | + |
|
power | status |
|
| |
|
|
| volume |
|
alt audio | freeze | + |
| |
sleep | ext input |
|
| |
3 | analog format |
|
| |
1/3 | Analog | DTV |
| VCR |
Remember, if the VCR has an INPUT SELECTOR switch, place it in the LINE or CAMERA position. Note: Unattended Timer Recordings with a VCR are possible, but not recommended with this connection since the DPTV must be left ON for the VCR to record.
31