PICTURE MENU CONTROLS (CONTINUED)
RED/BLUE CONVERGENCE
Convergence is the correct lining up of the red and blue
light paths on the TV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are necessary for your TV.
BEGIN
1Select CONVERGENCE control.
With PICTURE MENU (2 of 2) on screen, move the RED highlight
with the MENU (M) buttons. Then press the MENU button.
2If there is RED or BLUE color fringing on the White cross, press the MENU button to continue.
3Press the MENU buttons to move the red or blue cross directly over the white cross on the TV screen.
The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).
4Press the STATUS button to clear the screen when convergence adjustments are complete.
STOP
SMART HELP
MAIN MENU |
|
PICTURE | SOUND |
FEATURES | HELP |
1ST TIME SETUP | EXIT |
24
1 | + | PLAY ▶ |
| STATUS | |
CLEAR |
|
|
|
| |
REW |
| MENU |
|
| |
− | M | + | FF | ||
◀◀ | |||||
|
|
|
| ▶▶ |
|
|
| PAUSE II |
| MUTE | STOP ■ | SURF |
1 | VOL |
| CH |
3
ON/OFF POS SWAP FREEZE
|
| SIZE |
2 TUNER PIP |
|
|
A◀ ◀ B 1 | 2 | 3 |
TV/VCR 4 5 6
ENTER
SLEEP 7 8 9
SMART0
POWER VCR ACC TV
M O D E
PICTURE MENU |
|
COLOR | TINT |
BRIGHT | PICTURE |
SHARP | CLEARVIEW |
EXIT | MORE... |
| 1 OF 2 |
PICTURE MENU |
|
CONVERGENCE |
|
FLESH CORRECTION |
|
EXIT | MORE... |
| 2 OF 2 |
If there is RED or BLUE
fringe on the WHITE cross, use this adjustment to improve the picture.
2
Press "M" to Continue
- or -
Press "" to Return
Remember. Convergence has been set at the factory for best viewing, but if one or more of
the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.
3 |
Use the keys to merge the
RED fringe into the WHITE
cross. Press "M" to Continue.
NOTE: Adjustments for
of the TV’s Convergence control system. Follow the TV’s
Use the keys to adjust
Press "M" to Adjust or Press "STATUS" to Continue
Press "M" to Save Press " " to Undo
Press " " to
recall Factory Settings
8