MORE PIP CONNECTIONS
1 |
2 |
3 |
The following example is for an alternative PIP connection
hookup using an external Cable Converter Box and a VCR (as the picture source for the PIP window).
BEGIN
First use an optional signal
splitter and connect the original cable TV signal to both the CABLE IN on the Cable Converter and the ANTENNA A plug on the rear of the TV.
Connect the CABLE OUT on the Converter to the ANT. IN on the VCR.
Connect the VIDEO OUT jack
| REAR OF TV | 3 |
FIXED |
| VIDEO |
| VIDEO OUT |
|
VAR |
| L |
|
| AUDIO |
PIP |
| R |
R | L | AUX 1 AUX 2 |
AUDIO OUT | INPUTS | |
| ANT A/CABLE | PIP |
| 75 V UHF/VHF | ANT B/CABLE |
|
| 75 V UHF/VHF |
SMART HELP Remember
to use the Cable TV Converter Box to select channels for PIP, the VCR must be set to the same channel as the channel selection switch on the rear of
the Cable Converter
(eitherchannel 3 or 4).
on the VCR to the VIDEO IN jack on the TV.
Also connect the AUDIO OUT (R and L) jacks from the VCR to the AUDIO IN jacks on the TV.
STOP
1
The ANTENNA A signal input supplies the TV’s Main screen picture, and the AUX 1 VIDEO Input connection from the VCR serves as the picture source for PIP. Be sure to set the TV’s PIP SOURCE SELECT control to the “AUX 1 VIDEO” mode in order to display the Audio/Video Input signals within the PIP window.
AUDIO VIDEO CABLES
(RCA Plug Cables - optional)
SIGNAL
SPLITTER
Contact the Parts Information Center 1 800
to order any optional accessories
OUT
ANTENNA
OUT
VIDEO
ANTENNA
IN
IN
OUT
L AUDIO R
IN
VCR
2
CABLE OUT
CABLE IN
CABLE TV CONVERTER
53
53