Philips BDP2500 user manual Use Philips EasyLink, One-touch play, One-touch standby, 20 EN

4Press to select a language, then press OK.

Use Philips EasyLink

This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol.You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors.

Note

•To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other devices connected to TV. Refer to the TVs/devices manual for details.

One-touch play

1Press the STANDBY button to turn on this product.

»The TV (if supports one-touch play) automatically turns on and switches to the correct video-in channel.

»If a disc is loaded in this product, disc play automatically starts.

One-touch standby

1Press and hold the STANDBY button on the remote control for more than 3 seconds.

»All the connected devices (if the device supports one-touch standby) automatically switch to standby.

Note

•Philips does not guarantee 100% interoperability with all HDMI CEC devices.

20EN