Allied Telesis 8624T/2M, 8648T/2SP Electrical Safety and Emission Compliance Statement, Category

Installation & Safety Guide 3

Electrical Safety and Emission Compliance Statement

STANDARDS: This product meets the following standards:

Category	Approval Agency and Requirement
	UL60950-1
	CAN/CSA-C22.2 No. 60950-1-03
	EN60950-1
	EN60825-1
Electromagnetic Compliance	FCC CFR47 Part 15 Class A
	EN55022 Class A
	EN61000-3-2
	EN61000-3-3
	VCCI Class A
	AS/NZS CISPR22 Class A
Immunity	EN55024

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Canadian Department of Communications

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.