Philips bClever SV1 manual PC/Macintosh, Connecting to an external monitor

Page 15

4. Installation

Connecting to a computer >

PROJECTOR2

Data

S-VIDEO

VIDEO

AUDIO-L

AUDIO-R

FILTER

For external monitor connection only

5

2

MONITOR 4

32

COMPUTER

1

Mac/PC

VGA/MAC adapter

Data out

PC/Macintosh

1Connect the Data (out) socket of the computer to the Data socket of the projector and secure the plugs by tightening the thumb screws.

For this, use the VGA cable supplied (1).

2Select ‘Data’ as input source using the Source button on the projector or the Source selection buttons on the remote control.

You can also select ‘Data’ in the ‘Features’ menu. See ‘On Screen Display Menu’ - ‘General explanation’ on how to navigate through the menu.

Connecting to an external monitor

1Connect the VGA Y connector marked ‘Projector’ (2), of an optional VGA Y-cable, to the Data socket of your projector.

2Connect the VGA Y connector marked ‘Computer’ (3) to the VGA cable supplied (1).

3Connect the VGA Y connector marked ‘Monitor’ (4) to the VGA cable of the external monitor (5).

4Switch on your Computer and projector.

5Press the Data button on the remote control.

6Press Menu.

The menu bar appears on the screen. The ‘Picture’ item is highlighted.

Philips Multimedia Projector

15

English User guide bClever SV1

 

 

 

Image 15
Contents BClever SV1 Introduction Set upInstallation IndexOperation MaintenanceTroubleshooting IndexIntroduction Introduction Source Menu Error indicator Volume -/+Indicator Source indicatorsFunctional overview IR sensor Height/Level adjuster @ Focus ring #To activate and de-activate the menu Key lockMenu To select the current projection source Data, S-Video,VideoRemote control Video source connections FilterLamp compartment Data 1 Data connectionSwitching on the projector Set upTo raise Set upHeight/Level Adjuster B will come out ProjectorMoving/transporting the projector Remote controlPreparation Standby and disconnect the mains lead and all other cablesComponent video via Data inputYPbPr, RGBsync, RGBsog General information Data inputVideo input K1, LPC/Macintosh Connecting to an external monitorConnecting to a computer Video Scart connection Video CvbsVideo Component/HDTV PR/R, Pb/B,Y/G When YPbPr connection has been madeScart connection Rgbs When RGBsog connection has been madeOperation MessagesDirect key feedback Error messages Operation PreparationFeedback messages Menu tree OperationVivid Natural Colour Min 100 max Contrast Min -100 max169 Enlarged 43 toMinute 60 minutes OffOn Lamp used for OK 3 sec OperationGeneral explanation 1 Press Menu Data adjustments Picture adjustmentsFeatures Hue only for Ntsc Video/S-Video adjustmentsTo adjust the tint of the projected image Adjusts the colour saturation of the projected imageSet up adjustments Examples Zoom/MagnificationPicture Format Personal Start-up text Cleaning the lens MaintenanceCleaning Cleaning the cabinetLamp MaintenanceLamp replacement Remove the lamp door, using a screwdriverTime Resetting the lamplifeRead as follows TroubleshootingData mode Component Video modeCase of YPbPr or RGBsog Scart connection TroubleshootingCase of YPbPr connection Case of RGBsog Scart connectionPicture too dark or bright with external monitor connected IndicatorsError indicator Red lamp error Red blinking fast temperature error