Philips bClever SV1 manual Resetting the lamplife, Time

B B

B

B

B

6. Maintenance <

5Unscrew screws B.

6Grasp the lamp holder handle and carefully pull the lamp holder out of the projector.

• Do not tilt. If the inner tube is broken glass particles may fall out.

• Keep lamp holder opening to your right. Do not touch lamp or point lamp holder opening at anyone.

7Carefully remove the new lamp housing from its package.

•Always use the same type of lamp: LCA3122/00 (150 W), 12nc: 8670 931 22009.

•Do not touch lamp or point lamp housing opening at anyone.

•Do not drop, as the impact may cause the lamp to break.

8Place the lamp holder in the guiding slots and insert into the lamp compartment.

9Tighten screws B again.

10Put the lamp door back in place, using a screwdriver.

– The Mains inlet socket will open again.

11Insert the mains lead into both the projector Mains inlet socket and the wall socket.

12Press the Standby button to switch on the projector.

13Reset the lamp life time (see ‘Resetting the lamplife time’).

14Dispose of the old lamp in special chemical disposal bins.

Resetting the lamplife					1 Press Menu.
			time
				STAND BY
MENU	OK
			PICTURE SIZE
VOLUME +		BRIGHTNESS	CONTRAST	FREEZE
		PICTURE FORMAT COLOUR TRACKING ZOOM
		DATA	S-VIDEO	VIDEO
PICTUREI SIZEI –	PICTUREI SIZEI +	KEY LOCK	AV MUTE	INFO
		MENU		OK
VOLUME –
				KEYSTONE
			MUTE
DATA S-VIDEO	VIDEO
STANDBY
SOURCE	AV MUTE

–The menu bar appears on the screen.

2Use Cursor Control to select ‘Lamp counter’ in the ‘Set up’ menu.

4Press OK for 10 seconds to reset the lamp counter.

5If required, select another item you wish to adjust or press Menu to exit.

Philips Multimedia Projector 33 English User guide bClever SV1