Philips TP3684C1 Using the TV Speaker Control and Audio Output Jacks, Connect the Right and Left

Page 30

USING THE TV SPEAKER CONTROL AND AUDIO OUTPUT JACKS

Would you like to hear TV pro- grams through your audio hi-

fi system? The TV's Audio Output jacks and TV Speaker On/Off con- trol work together to offer you this TV sound option.

BEGIN

Connect the R(ight) and L(eft)

AUDIO OUT jacks on the TV to the R and L Audio Input jacks on your amplifier or sound system.

Set the audio system's volume to a normal listening level.

Turn the TV and audio system ON. You can now adjust the sound level coming from the audio sys- tem with the VOLUME (+) or (–) buttons on the TV or remote.

To hear the TV sound from only the audio system speakers:

Press the MENU button on the remote to show the on-screen menu.

Press the CURSOR DOWN ■

button twice to select the SOUND menu.

Press the CURSOR RIGHT

▶▶button and the menu will shift to the right to display an adjustment bar in front of the TREBLE control.

Press the CURSOR DOWN ■ button to select the SPEAKERS

control.

Use the CURSOR RIGHT ▶▶ or CURSOR LEFT ◀◀ buttons

to turn the television’s speakers OFF. You should now only hear TV sound coming from the audio system speakers.

SMART HELP

Remember, the audio

system may have to be in AUX(iliary) mode to play sound from the TV.

.REVIEW		MOVIE RATING				.REVIEW
.PICTURE		– – – – – –				.PICTURE		TREBLE
.SOUND		TV RATING				.SOUND		BASS
.FEATURES		– – – – – –				.FEATURES		BALANCE
.INSTALL		BLOCK UNRATED			OFF	.INSTALL		AVL
		NO RATING			OFF			STEREO
						. .		SAP
						. .
						.SOUND
						. .	..	28	BASS
						. .	.	28	TREBLE
							.		BALANCE
							.		AVL
							.		STEREO
									SAP
	SLEEP			POWER		....
	SLEEP

						.SOUND
TV	AV	ON/OFF	POSITION	FREEZE
VCR	SWAP	SOURCE	PIP CH				.		BALANCE
			UP	DN					AVL
ACC									AVL
ACC							.
							.		STEREO
							.		SAP
3	SMART			SMART	7		.		AUDIO OUT
3	SOUND			PICTURE	7	OFF .			SPEAKERS
	MENU			SURF	5
						JACK PANEL			AUDIO OUT (RED/WHITE)
						JACK PANEL
	VOL			CH	LOCATED ON THE REAR
	VOL			CH	OF THE TELEVISION
		MUTE		4	OF THE TELEVISION
	CC	STATUS	CLOCK	4	6
		EXIT	TV/VCR		6
	VCR			MULTI					1
	RECORD	INCREDIBLE		MEDIA					1
		INCREDIBLE
		STEREO							VIDEO
									L
						ANT "A"			AUDIO
						75			R/MONO

IN-1 IN-2 OUT

RCA PHONO

PLUG CABLES

R	L
AUX/TV INPUT
PHONO INPUT

2

AUDIO SYSTEM

30

Image 30

Contents TP3684C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features Cable/AntennaPress the STATUS/EXIT button Adjusting the TV PictureButtons to adjust the selected control To remove the menu from the screenPress the Numbered buttons Setting the TV’S ClockTimer controls Cursor UP or CursorPress the Menu button on Activating the TV’S on Timer ControlTimer control Remote to show the on-screen menuSelecting the TV’S on Timer Channel To enter the desired start up time Setting the TV’S on Timer Start TimeTo highlight the Start Time Press the STATUS/EXIT but- ton to remove the menu fromTurning on the on Timer Display Button three times to select the Features menuPress the Cursor Down Understanding Smartlock Movie RatingsDown to highlight Using Smartlock Setting UP the Access CodeEnter current access code SmartLock controlThis stops the viewing of VCR, DVD, etc Using Smartlock Blocking ChannelsPress the Channel + or Select blockBe highlighted Using Smartlock Movie RatingPress the Cursor Right Button to access the movie ratings Button to select Movie RatingUsing Smartlock TV Rating Appear within the menuButton to select TV Rating Using Smartlock Blocking OptionsLeft button to set Using Smartlock Block UnratedButton or the Cursor Block Unrated to on orMenu Using Smartlock no RatingPress the Menu button on the remote to show the on-screen Left button to set noReviewing the Smartlock Settings Example Blocking is set to OFFViewing Blocked Programming XxxxTo highlight the NR control Turn the NR feature on or OFFTurning on the Noise Reduction Control Button again to highlight the NR option areaTurn the Contrast + feature on or OFF Turning on the Contrast + ControlButton again to highlight the Contrast + option area Button to highlight the Closed CAP control Using the Closed Caption ControlSelect the mode you want Button again to highlightUsing the Sleep Timer Control Good BYE SleepAdjusting the TREBLE, BASS, and Balance Sound Controls Button twice to select the Sound menuOn a selected show and the TV is Setting the TV for Stereo and SAP ProgramsRemember, if stereo is not present Placed in the Stereo mode, the sound comUsing the Incredible Stereo Control Using the Volume BAR ControlUse the Cursor Left or Right buttons to set Setting the Audio OUT ControlButton repeatedly to select Audio OUT to Variable orPress the Cursor Down button to select the Speakers Using the TV Speaker Control and Audio Output JacksConnect the Right and Left Use the Cursor Right or Cursor Left buttonsUsing the AUDIO/VIDEO Input Jacks Connect the Video yellowUsing the AUDIO/VIDEO Input Jacks CONT’D Connect the S-VIDEOTurn the VCR or Digital Press the Smart Picture Button repeatedly to select eitherUsing the Smartsound Control Press the Smart Sound butRead, the Surf List is Press the Channel + orPress the Surf button on EMPTY, Press to addSetting the Remote Control to Operate Accessory Devices Going on to the following section Is necessaryPress the Smart Sound Place the TV/VCR/ACCPress the VCR Record Enter the THREE-DIGITTurn on the device by press- ing the Power button on Mode Switch in the proper posi TionDevice you are attempting to pro- gram Remote Control Direct Entry Codes Remote VCR Code noRemote Dvdcode no Using the REMOTE’S VCR Buttons Right and Left jacks from Connect the Video OUTAlso connect the Audio OUT Move to the next page afterPress the PIP Source but Turn the TV and VCR orPress the PIP ON/OFF but AV 1, AV 2, SVID-R for pictureUsing the PIP PICTURE-IN-PICTURE Feature Button to select the PIP menu Adjusting the PIP Color and TintAdjust the Color and Tint bars to the desired levels Remember, althoughConnect the Cable OUT on First use an optional signalMore PIP Picture -IN -PICTURE Connections Connect the Video OUT jackConnect the yellow Video First connect the original cableConnect the ANT OUT jack on Connect a second yellow VideoTV Displays Wrong Channel or No Channels Above Tips if Something Isnt WorkingGlossary to Television Terms IndexPhilips Consumer Electronics Company Texas Limited Warranty