HOOKING UP YOUR TV (BASIC CONNECTION)
Antenna Connection
•Connect the aerial plug to the antenna socket ¬ on the backcover.
•Insert the mains plug into the wall socket.
Mains Connection
•For correct mains voltage, refer to type sticker at the rear of the TV set
•Consult your dealer if mains supply is different. Note :This diagram is not representative of the actual plug and socket.
Switching on the Set
•Press the main power button to switch on/ off the TV.
•If the set is on standby (indicator is red), press the Power button on the remote control to switch on set.
USE/CARE OF REMOTE CONTROL
• Insert the correct type of batteries into the compartment.
• Ensure the batteries are placed in the right direction.
5
5 | 09/12/03, 10:41 AM |