Installation
Preparation
Place the TV on a solid surface.
For ventilation, leave a space of at least 5 cm free all around the set.
To prevent any fault and unsafe situations, please do not place any objects on top of the set.
Insert the aerial plug tightly into the aerial socket g at the back of the TV with an aerial cable of good quality.
CABLE
English
4Check if the loudspeaker switch at the back of the TV is in the l position.
Surround Sound loudspeakers
4Connect the two Surround Sound rear loudspeakers supplied to the connector clips at the back of the TV. Always connect both Surround Sound loudspeakers.
4Connect the left rear loudspeaker at REAR L and the right rear loudspeaker at REAR R at the back of the set.
4Push the connector clip down and insert the end of the wire into the opening : the positive wire (the one with the black line) to the red loudspeaker connection; the negative wire to the black loudspeaker connection. Do not insert the wires too far.
8 | mm |
|
R | L |
REAR
FRONT
The Surround Sound loudspeakers should always be located behind or to either side of the listener. If preferred you can also hang the loudspeakers on the wall.
Insert the mains plug in the wall socket with a mains voltage of
3