Philips 32PW9631/12 manual Enter the programme number, Repeat End Store steps 1 to, Press Menu

VCR 1	TV	TUNER
VCR 2		TAPE
a SAT		DCC
AMP		CD
M
TV		B
MENU	B	OK
B		B
K	B	K
a		0
L	c	L

E 1 2 3

e 4 5 6

c 7 8 9

a J 0 2

Direct selection of a TV channel

If you know the frequency, or the C- or S-channel number, it can be entered directly with the digit keys on the remote control and in this way call up the TV channel.

Ask for a list from your cable company or dealer, alternatively consult the Table of frequencies on the inside backcover of this handbook.

4Select Search with the keys V or W.

4Enter the 3 digits of the desired frequency or the 2 digits in case of C-or S-channels.

4For frequencies under 100 MHz, first enter a 0. For example : 063.

5 The frequency is automatically finetuned.

Have you entered a wrong number ?

First complete the frequency or the channel number with arbitrary numbers and then start again.

Go on to 3.

3 Enter the programme number

Now assign a number of your choice to the TV channel you have located. In this way you decide the order of all your TV channels.

4Select Programme Number with the keys V or W.

4Select with the keys C or B or with the digit keys the desired programme number.

Go on to 4.

4

repeat

end

Store steps 1 to 3

Now the steps 1 to 3 must be stored in the memory.

4Select Store with the keys V or W and press OK.

5 Stored appears briefly at the bottom of the screen.

5 The programme number and probably the programme name are stored in the programme list after the message has disappeared.

If you want to store another TV channel.

4 Repeat & to ‘.

If you are connected to a cable system.

4 Begin immediately with é. You have already selected the TV system in & for all channels.

4	If you have finished storing TV channels.
	Press MENU.
5	The INSTALLATION MENU reappears.

8