Philips 27RF 70S manual Sound Using the TV Speaker Control and Audio Output Jacks, Treble

Page 34

SOUND – USING THE TV SPEAKER CONTROL AND AUDIO OUTPUT JACKS

Would you like to hear TV pro- grams through your audio hi- fi system? The TVÕs Audio Output

jacks and TV Speaker ON/OFF control work together to offer you this TV sound option.

Connect the R(ight) and L(eft) AUDIO OUT jacks on the TV to the R and L audio input jacks on your amplifier or sound system. Set the audio systemÕs volume to a normal listening level.

Turn the TV and audio sys- tem ON. You can now adjust the sound level coming from the audio system with the VOLUME (+) or

(Ð)buttons on the TV or remote control.

To hear the TV sound from only the audio system speakers:

Press the MENU button on the remote control to show the onscreen menu.

Press the CURSOR DOWN

button once to highlight SOUND.

Press the CURSOR RIGHT button and the menu will shift to

the left.

Press the CURSOR DOWN button repeatedly until the SPEAKERS control is highlighted.

Press the CURSOR RIGHT or CURSOR LEFT button to turn the televisionÕs speakers ON or OFF. With the SPEAKERS con- trol set to OFF, you should hear the TV sound coming only from the audio system speakers.

SMART HELP

Remember, the audio

system may have to be in AUX(iliary) mode to play sound from the TV.

	PICTURE			TREBLE
	SOUND			BASS
	FEATURES			BALANCE		SOUND
	INSTALL			AVL		SOUND
	INSTALL			AVL		TREBLE	30
				INCR. SURROUND		TREBLE	30
				INCR. SURROUND		BASS
						BASS
						BALANCE
						AVL
						INCR. SURROUND
						SOUND
	SLEEP			POWER		HEADPHONE
	SLEEP					STEREO
						STEREO
			PIP			SAP
	TV/VCR	ON/OFF	POSITION FREEZE			AUDIO OUT
	A/CH					AUDIO OUT
	A/CH					SPEAKERS	ON
	INCR. SURR.	SURF	SWAP	SOURCE		SPEAKERS	ON
	INCR. SURR.	SURF	SWAP	SOURCE
							OR
3						SPEAKERS	OFF
3	SOUND			PICTURE	5 7
	MENU			M-LINK	5 7
7
	VOL			CH
	6	MUTE
	6	STATUS/EXIT	CC	CLOCK
	4 SOURCE	STATUS/EXIT	CC	CLOCK		8	8

ITR/REC	HOME	HOME	PERSONAL					M-Link
ITR/REC	HOME	HOME	PERSONAL
			+	R	–	–	L	+
	VIDEO	MOVIES		SURROUND SOUND

		1	Monitor out	AV1 in AV2 in	JACK PANEL
PROGRAM LIST	OPEN/CLOSE	1			JACK PANEL
		ANT 75Ω	VIDEO		LOCATED ON THE
OK				Y	REAR OF THE
				Y

			L		TELEVISION
					TELEVISION
			AUDIO	Pb	S-VIDEO
			AUDIO
			R
				Pr
		AUDIO OUT			RCA PHONO
		AUDIO OUT			PLUG CABLES
		(RED/WHITE)			PLUG CABLES
		(RED/WHITE)
				R	L
				AUX/TV INPUT
				PHONO INPUT

2

AUDIO SYSTEM

34

Image 34

Contents For fast help, call us first Warranty Verification Important Safety Instructions Table of Contents Features Standard Broadcast VHF/UHF or Cable TV Catv channel capabilAdjusting the Picture Turning on the Imagemax Control Turning on the Dynamic Noise Reduction ControlPress the STATUS/EXIT button Press the Cursor Right button and the menu will shift to Using the Closed Captioning ControlPress the STATUS/EXIT but- ton to remove the menu from Press the Cursor Right Selecting the Screen Format SizePress the Cursor Down Press the STATUS/EXIT butPress the Cursor Right Activating the Blue Mute ControlPress the Menu button on Press the STATUS/EXIT butUsing the Sleep Timer Sleep OFFPress the Cursor UP or CUR- SOR Down button to select Timer Setting the ClockPress the Cursor Right but Timer Setting the Start Time Timer Setting the Stop Time Press the Numbered but Timer Selecting the ChannelChannel. Or, press the Cursor Timer Setting Activate to on or OFF Once press the CursorThen press the Cursor Down Timer Turning on the Timer DisplayOr Cursor Left button to turn Understanding Autolock You also can block individual channels or block programmingAutolock Setting UP the Access Code CodeAutolock Blocking Channels Left. Then press the CursorButton again to highlight Enter your four-digit Access CODE. Correct willAuto Lock Blocking by Movie Rating Cursor Down button to highAutolock Blocking by TV Rating Enter your four-digit Access Code and the menuAutolock Turning Block on or OFF Press the Cursor Right orAutolock Blocking Unrated Broadcasts Enter your four-digit Access Code and the menuOr Cursor Left button to Autolock Blocking Broadcasts That have no Rating Enter your four-digit AccessOr Cursor Left button to tog Autolock Reviewing Your Settings Block Unrated No RatingAuto Lock Viewing Blocked Programming Use the Cursor Right or Sound Adjusting the Treble , Bass , and BalanceCursor Left button to adjust Control, press the CursorSound Adjusting the Volume VolumeSound Using the AVL Audio Volume Leveler SOR Right or Cursor LeftSound Using Incredible Surround Press the INCR. SURR. butSound Setting the TV for Stereo and SAP TrebleSound Setting the Audio OUT Control Audio OUTSound Using the TV Speaker Control and Audio Output Jacks TrebleSound Using the Surround Sound External Speaker Connections Sound Using the AUDIO/VIDEO Input Jacks Press the Source buttonSound Using the AUDIO/VIDEO Input Jacks CONT’D Super-Video connection on the rear of the TV can proDevice to the Y, Pb, Pr input jacks on the TV Press the Picture button Remote Control Using AutopicturePress the Picture button repeatedly to select either PER Press the Sound button on Remote Control Using AutosoundPress the Sound button Press the Surf button on Remote Control Using Channel SurfPress the CHANNEL+ or Ð Screen, press the CursorPIP Basic Connections First, use an optional signalConnect the Video OUT jack PIP Selecting the Signal Source AV1, AV2, AV3, S-VIDEO Ð forPIP Remote Control Buttons Cursor Left button to PIP Adjusting the Color and TintPress the Cursor Right or Cursor Left button to PIP More Connections Cable Box and VCR ConnectionsPIP More Connections Cont ’D No Power No Picture No Sound TroubleshootingGlossary of Television Terms Index Factory Service Locations CanadaLimited Warranty