Philips 27RF 70S manual Device to the Y, Pb, Pr input jacks on the TV

SOUND – USING THE AUDIO/VIDEO INPUT JACKS (CONT’D)

COMPONENT VIDEO INPUTS

Component Video inputs pro- vide for the highest possible

color and picture resolution in the playback of digital signal source material, such as with DVD play- ers. The color difference signals (Pb, Pr) and the luminance (Y) signal are connected and received separately, which allows for improved color bandwidth infor- mation (not possible when using composite video or S-Video con- nections).

Connect the Component (Y, Pb, Pr) Video OUT jacks from the DVD player (or similar

NOTE: Repeatedly pressing the SOURCE button on the remote will toggle the picture source from the current channel, the last viewed channel, then the CVI (or AV1) connection, the AV2 connection, and the AV3 connection. Use CVI for Component Video Connections.

24

AV3

AV2

	BACK OF TV
8			8
			M-Link
+	R –	–	1
	SURROUND SOUND

Monitor out AV1 in AV2 in 2

VIDEO

ANT 75‰

Y

L

PbS-VIDEO

AUDIO

R

Pr

device) to the (Y, Pb, Pr) in(put) jacks on the TV.

Connect the red and white AUDIO CABLES to the Audio (left and right) output jacks on the rear of the accessory device to the Audio (L and R) AV1 in(put) jacks on the TV.

CVI

			COMP
COMP VIDEO			VIDEO
			(BLUE)
(BLUE)
COMP
COMP VIDEO	S-VIDEO	VIDEO	AUDIO
VIDEO
Y	Pb		R
(YELLOW)	OUT	OUT	OUT
	Pr		L

1

AUDIO IN

(RED/WHITE)

2

Turn the TV and the DVD (or digital accessory device) ON.

Press the SOURCE button on the remote control until the CVI source is selected. After CVI appears, insert a disc into the DVD (or other digital accessory device) and press the PLAY but- ton to view the disc on the televi- sion. If CVI did not appear, per- form steps 5Ð9.

NOTE: The actions described in steps 5Ð9 are not illustrated on this page.

If CVI did not appear onscreen as one of the choices available to you by pressing the SOURCE button, press the M Link button on the remote con- trol to display the M-Linkªonscreen menu.

Press the CURSOR RIGHT or CURSOR LEFT button to highlight AV1.

Press the CURSOR UP but- ton to toggle from AV1 to CVI.

Press the STATUS/EXIT but- ton to remove the M-Link™menu from the screen.

Press the SOURCE button to tune to the CVI source. You are now ready to view the disc on the TV.

SLEEP POWER

		PIP
TV/VCR	ON/OFF	POSITION	FREEZE
A/CH
INCR. SURR.	SURF	SWAP	SOURCE

	SOUND			PICTURE
	MENU			M-LINK
4	VOL	MUTE		CH
	SOURCE STATUS/EXIT		CC	CLOCK
	ITR/REC	HOME	HOME	PERSONAL
		VIDEO	MOVIES
	PROGRAM LIST			OPEN/CLOSE
	OK

3

BACK OF DIGITAL

ACCESSORY

DBS, DVD, Video Game, etc.

(EQUIPPED WITH COMPONENT VIDEO OUTPUTS AND AUDIO OUTPUT JACKS)

NOTE: Optional video/audio cables (with standard RCA plug connectors) are available to complete your component video input jack connections. Contact your dealer or our Parts Information Center (1-800-851-8885) to order any optional accessories.

SMART HELP

The description for the component video connectors

may differ depending on the DVD player or accessory digital source equipment used (for example, Y, Pb, Pr; Y, BÐY, RÐY; Y, Cr, Cb). Although abbreviations and terms may vary, the letters b and r stand for the blue and red color compo- nent signal connectors, and Y indi- cates the luminance signal. Refer to your DVD or digital accessory ownerÕs manual for definitions and connection details.

38