Connect stereo amplifier and two extra front speakers
To enhance the sound reproduction of your TV you can connect two extra front loudspeakers via an external amplifier.
Connect the audio cables to the audio input of your amplifier and to AUDIO L and R at the back
AUDIO | of your TV. The output level is controlled by the |
| |
| volume control of your TV. |
Note: Switch off the TV and your audio amplifier before connecting them. Set the audio amplifier’s volume to minimum.
To select connected equipment
Press the v key on the remote control repeatedly to select EXT1, EXT2, EXT3 or SIDE according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Cinema Link surround receiver
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the Recorder or DVD menu on screen.
Recorder
Òp ‡ π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
DVD 
Òp ‡ π † Ï
Prev. Play Stop Play Next Eject
&Press the MENU key on the remote control.
éSelect the Recorder or DVD menu with the cursor up/down.
“Press the cursor left/right, up/down to select one of the recorder or DVD functions.
The ® key for recording can be operated in the TV mode.
If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.
19