TV Setup
General Source Decoder
Setup
Menu background
Smart surf
Dual screen format
Freeze format
Factory settings
NEXTVIEW provider
OSD
Programme title
Teletext level 2.5
Auto surround
Set/Change code
The Setup menu contains items that control the settings of the TV’s functions, features, services and peripherals you may have connected.
The General menu allows you to change settings that will typically be accessed only occasionally. The Source menu allows you to select a source. The Decoder menu allows you to define one or more programme numbers as decoder programme numbers.
General
This menu allows you to change various settings that are presumably adjusted less frequently than most other settings.
Press the i key on the remote control to get information about the selected menu item.
Smart surf
&Select Smart surf.
éWith the cursor left/right, select
•2 programmes if you want the 0 key to toggle between the current and the previously selected channel,
•9 programmes if you want the 0 key to summon a list of up to 9 channels which can be selected,
•Themes if you want the 0 key to quickly select TV programmes if NEXTVIEW with defined themes is broadcast.
To add/remove a channel or source:
Tune to the channel or source you wish to add or remove. Press the 0 key and press the cursor right to add or remove.
Note: If there are already 9 channels/sources in the list, the one at the bottom of the list will be removed.
Dual screen format
This menu allows you to select the preferred format which can then be displayed toggling the
bkey on and off.
See Dual screen/PIP/ Multipip, p. 13.
Select Dual screen, PIP, PIP 3 or PIP 9 with the cursor down.
When Dual screen mode is activated with the remote control b key, and when:
•Dual screen is selected, the TV splits the screen into two equally sized screens.
•PIP is selected, the TV shows a full screen of video with a pip window of video on top if it;
•PIP3 or 9 is selected, the TV will display 3 or 9 pip screens.
Freeze format
Freeze format allows you to select among three options: Freeze, Replay or Photo finish, to be activated when you press the S key on the remote control. See p. 3.
Note: Continuing to hold the S key down will also cycle the TV through the various formats. Changing the format this way does not store the selected format.
Factory settings
This resets the picture and sound settings to their predefined factory values, but maintains the channel installation settings.
NEXTVIEW provider
Select a TV broadcaster that provides
NEXTVIEW data. How to make use of NEXTVIEW, see p. 14.
OSD (On Screen Display)
See Use of the remote control, p. 3, i On screen information.
&Select OSD.
éSelect Normal to activate the continuous display of the programme number. Also TV channel and programme information are extended. Minimum will display reduced channel information.
Note: When subtitles is switched on, see Features, p.12, continuous display of the programme number is not possible.
8