Philips 29PT9417 Audio- and video equipment keys, Record with your recorder with EasyLink

Page 20

Audio- and video equipment keys

B

VCR DVD SAT AMP CD

v Select

Ò ‡ π

®

æb

OK

Most of the audio and video equipment from the Philips range of products can be operated with the remote control of your TV.

Press the Select key to operate any of the equipment indicated in the display. Another device can be selected by pressing Select repeatedly within 2 seconds. The led will blink slowly to indicate the device.

Press one of the keys on the remote control to operate the peripheral equipment.

To return to TV mode press Select while the led is blinking.

When no action is taken within 60 seconds, the remote goes back to TV mode.

Note: When the Select key is pressed and hold for more than 2 seconds, the RC5/RC6 system select command is transmitted.

SMENU

+ +

V ¬ P

- -

1 2 3

4 5 6

7 8 9

i 0 0

Active Control

b h q

Bto switch to standby

Sfor pause (VCR, DVD, CD)

®for record,

Òfor rewind (VCR, CD); search down (DVD, AMP)

for stop

πfor play

for fast forward (VCR, CD); search up (DVD/AMP)

æto select your choice of subtitle language (DVD); RDS news/TA (AMP); to shuffle play (CD)

bto select a DVD title;

RDS display (AMP); info on screen (CD)

idisplay information

MENU to switch the menu on or off

-P + for chapter, channel, track selection

0 to 9 digit entry

0tape index (VCR),

select a DVD chapter, select a frequency (AMP)

UVCR timer

Qsurround on/off (AMP, CD)

cursor up/down

to select the next or the previous disc (CD)

cursor left/right

to select the previous or following track (CD) search up/down (AMP)

Selecting submodes for DVD+RW, SAT, CDR

&The remote control should be in TV mode.

éPress the OK key together with:

digit 1: DVD mode is selected

digit 2: DVD+RW mode is selected

digit 3: SAT (RC5) mode is selected

digit 4: SAT (RC6) mode is selected

digit 5: CD mode is selected

digit 6: CD-Rmode is selected.

Record with your recorder with EasyLink

In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen.

Continue to press the ® record key on the remote control for more than 2 seconds.

Note:

Switching programme numbers on your TV does not disturb recording !

When recording a programme from a peripheral connected to EXT. 1, 3 or SIDE, you can not select another TV programme on the screen.

20

Image 20
Contents Contents Preparation Keys on top of the TVPlace the TV on a solid surface M key to confirm your selectionUse of the remote control Menu/Remote control info On Screen informationSmart surf / Nextview themes Picture formatTo use the menus Select the menu language and countryAutomatic installation Manual installationStore TV channels Select your choice with the cursor rightGive name Reshuffle the programme listSelect Favourite TV channels Cursor up/down Non-favourite TV channel or externalTV Setup GeneralSource DecoderDemo TV menuPicture Smart pictureSmart sound SoundActive Control Features Dual screen / PIP / Multipip Display optionsScan PIP3 or PIP Define the position and the size of the single PIP screenNextview / Teletext guide Call Nextview / Teletext guideNextview guides Select TV channels by themeAcquisition and updating of Nextview information Teletext GuideBasic functions Teletext Teletext menu Side connections Connect Peripheral EquipmentRecorder VCR-DVD+RW Volume control of your TV To select connected equipmentCinema Link surround receiver Recorder or DVD with EasyLink Connect stereo amplifier and two extra front speakersTo switch to standby For pause VCR, DVD, CD For record Audio- and video equipment keysRecord with your recorder with EasyLink To select a DVD titleTips