EN |
| First time installation (Continued) |
|
|
|
PHILIPS Installation
This will help you to complete the Settings assistant.
Television
Settings assistant
Previous 
Next 
Skip 
Stop
PHILIPS Settings assistant
Please select your location before continuing:
Home
Shop
Step 3: Settings assistant: select your TV settings
By means of several split screens/full screens you are prompted to select your preferred picture, sound and ambilight settings, to finally arrive at a complete setting which satisfies you.
1.Press the green colour key on your remote control to enter the Settings assistant menu.
2.Select your Location with the cursor up/down.
>If you choose Shop it will skip the Settings assistant. The TV parameters for Picture, Sound and Ambilight will
then be set to predefined fixed settings. Press the green colour key again to proceed.
>If you choose Home it will display the Settings assistant.
3.Use the cursor left/right to each time select your preferred screen.
4.Press the green colour key to each time confirm your selection and to jump to the following screen.
>The following items will be presented sequentially.
In the header it is mentioned how many screens have been completed and how many screens there are in total.
The Settings assistant will step sequentially through the following settings: Picture, Sound and Ambilight.
5.Press the green colour key again to store all the settings and to return to the TV installation menu.
Note: when you skip or stop the Settings Assistant, then the standard settings Philips selected for you will be chosen.
6.Press the red colour key again to finish the First time installation procedure and to display the first stored TV channel.
Note: any time you can change or reset your settings or adjust individual settings for Picture, Sound and Ambilight in the TV settings menu. See p. 12, Use of the TV menu settings.
To control the settings of special TV functions, features and accessory equipment, see p. 22, Adjust feature menu settings.
10