First time installation (Continued) |
| EN |
|
|
|
a |
| Menu language | |
Please select your | English | |
language | Español | |
PHILIPS | Français | |
Hrvatski | ||
using cursor up and | Italiano | |
Magyar | ||
down | ||
............. | ||
| ||
Next |
|
PHILIPS Installation
This will help you to install the following sections:
Television
Settings assistant
Step 1: select your on-screen language
After the Welcome screen you are asked to select a language of the TV's
1.Press the cursor up/down to highlight your language.
2.Press the OK key on the remote control.
3.Follow the instructions on screen to proceed.
Step 2: complete the initial TV installation procedure
1.Press the green colour key on your remote control when Television is highlighted.
2.Select the country where you are now located.
Note: if you select a wrong country, the channel numbering will not be according to the standard for your country.
3.Press the green colour key on your remote control to start the Automatic channel installation.
>All available TV channels are searched for and stored automatically.This will take a few minutes.
When the search is complete, the menu will indicate the number of channels found.
Note: if you choose to install the channels at a later time, select the Automatic installation in the TV menu, Installation, Channels to scan available channels.
4.Press the red colour key again when the search is completed.
Previous Next Skip Stop
PHILIPS Television
System searching: please wait..........
Stop
9