Select your connections |
| EN |
|
|
|
TV menu
Installation | Connections |
Languages | EXT1 |
Country | EXT2 |
Channels | EXT3 |
Preferences | HDMI 1 |
Connections | HDMI 2 |
Decoder | Side |
Factory settings | Digital Audio IN |
Software upgrade |
|
Info |
|
This allows you to select the peripheral equipment you have connected to the audio and video connectors.
1.Select Connections.
2.Press the cursor right.
3.Select the input to which the peripheral equipment is connected.
>When you select EXT1, EXT2, EXT3, HDMI 1, HDMI 2, Side or Digital Audio In, a list appears which allows you to identify which type of peripheral equipment is attached to this input.
4.Press the cursor right again to enter the list of types of peripherals connected to the selected input.
5.Select the peripheral equipment with the cursor up/down.
Digital Audio In
If a peripheral equipment has a digital audio output, you can connect this with a single cable to the TV’s DIGITAL AUDIO IN connector.
In the Connections menu, assign the Digital Audio In to the corresponding external input to which your peripheral equipment is connected.
In addition to accepting audio input via Digital Audio In, the TV can output encoded Dolby Digital audio via the DIGITAL AUDIO OUT connector to an external amplifier or receiver. If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a single cable to the TV's DIGITAL AUDIO OUT.
See To make video and audio connections, Connect a Home Cinema amplifier, p. 45.
Select a Decoder channel number
TV menu |
|
Installation | Decoder |
Languages | Channel |
Country | Status |
Channels |
|
Preferences |
|
Connections |
|
Decoder |
|
Factory settings |
|
Software upgrade |
|
Info |
|
This allows you to define one or more channel numbers as decoder channel numbers when a decoder or a descrambler is connected to EXT1 or EXT2.
1.Select the channel number under which you have stored the programme that comes from your decoder or descrambler.
2.Select Status.
3.Select the input used to connect your decoder: None, EXT1 or EXT2.
<Select None if you do not want the selected channel number being activated as a decoder channel number.
29