Philips 14PV385/07 manual Searching for a tape position with picture scanning, Index search

PLAY B-K

STILL 2

Still picture

FWD 1- B

REW0- s

How can I set the counter to ‘0:00:00’?

You can set the counter to ‘0:00:00’ with

CLEAR . When you put a cassette in the TV- Video Combi, the counter will automatically reset to ‘0:00:00’.

The counter does not move

This occurs when there are no recordings on a portion of a tape. This is not a fault in your TV- Video Combi.

The screen shows ‘-0:01:20’

If you rewind a cassette from the tape position ‘0:00:00’, the counter will show for instance, ‘-0:01:20’ (the cassette was rewound to 1 minute and 20 seconds before ‘0:00:00’).

‘-:--’ is displayed in the ‘REM’ counter

This counter will automatically recognise the length of the tape. In addition, when you put in a cassette, the TV-Video Combi will first calcu- late the time played back. Therefore, ‘-:--’ appears first and only after the tape has been running for a few seconds, the correct remain- ing time will be shown.

Searching for a tape position with picture (scanning)

1.During playback, press (reverse)

or (forward).

2.If you want to search in super high speed, press REW0- s or FWD 1- B once more. (This function will not operate for a cassette recorded in SP mode in the NTSC standard.)

3.Press PLAY B-Kto resume playback.

1.During playback, press to stop the tape and display a still picture.

2.Press to resume playback. Scanning and Still picture interfere with the pic- ture quality. The sound is switched off. This is not a fault in your TV-Video Combi.

Searching for tape position without picture (forward wind and rewind)

1.Stop the tape with STOP C-L .

2.Press REW0- s (reverse) or FWD 1- B

(forward).

3.To stop the tape, press STOP C-L .

Index search

Every time a tape is recorded, an index marking is written on the tape.

These marked positions can be found again quickly and easily later.

1.To search for the previous marking, press

INDEX 3 and then REW0- s .

2.For the next marking, press INDEX 3 and

then FWD 1- B .

3.As soon as the TV-Video Combi finds this marking, it automatically switches to play- back.

Manual tracking

To manually adjust the tracking during playback, press PROG P+ PROG P– or P+ P– .

Tracking will return to Automatic Tracking Adjustment when you press STOP C-Land PLAY B-K , or insert a tape.

To remove vertical jitter in a Still picture, press P+ P– .

10 EN