Philips 14PV385/07 Sorting TV channels manually, Setting the clock

Page 9

1.Press MENU . The main menu will appear.

2.Select ‘TUNER SET UP’ with PLAY B-Kor

 

STOP C-L

and confirm with

FWD 1- B

.

3.Select ‘AUTO TUNING’ with

 

 

or

 

PLAY B-K

 

 

and confirm with

 

 

 

.

STOP C-L

FWD 1- B

PLEASE WAIT

STARTFINISH

❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

4.The automatic TV channel search starts. This allows the TV-Video Combi to save all avail- able TV channels. This procedure may take several minutes.

5.When the TV channel search is complete, ‘COMPLETED’ will briefly appear on the TV screen.

Sorting of TV channels from P01 to P06 will be performed automatically as follows.

P01:

BBC1

P04:

CH4

P02:

BBC2

P05:

CH5

P03:

ITV

P06:

SKY NEWS

Sorting TV channels manually

After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allo- cated to the programme positions (programme numbers) of the TV-Video Combi. You can use this function to individually sort the TV channels already saved.

The clock resets automatically

If you save a TV channel that transmits PDC on programme number ‘P01’, date and time will con- stantly be updated. As a result, time changes, i.e. daylight savings time, will be set automatically.

1.Press MENU . The main menu will appear.

2.Select ‘TUNER SET UP’ with

 

PLAY B-K

or

 

 

 

and confirm with

 

 

 

 

 

 

.

STOP C-L

FWD 1- B

3.Select ‘MOVE’ with

 

 

 

 

 

or

 

 

 

,

PLAY B-K

STOP C-L

and confirm with

 

 

 

 

 

.

 

 

 

 

 

 

FWD 1- B

 

 

 

 

 

 

4.With

 

 

or

 

 

 

, select the saved

PLAY B-K

 

STOP C-L

TV channel that you want to change.

 

 

 

 

 

 

MOVE

 

 

 

 

→P01:

02

P06:

90

 

P02:

03

P07:

99

 

P03:

05

P08:

121

 

P04:

10

P09:

124

 

P05:

74

P10:

130

 

SELECT K L CHOOSE B

 

END=EXIT

 

 

 

 

 

 

 

 

 

 

 

 

5.Confirm with FWD 1- B .

6.Move the selected channel with PLAY B-Kor STOP C-Lto the programme number you want to assign.

7.Confirm with FWD 1- B .

8.To assign other TV channels to a programme number, repeat steps 4 to 7.

9.To end, press STATUS/EXIT .

Setting the clock

If the display shows an incorrect time or ‘--:--’, the time and date must be reset manually.

If a TV channel that transmits PDC or Fasttext is stored under programme number ‘P01’, time/date will automatically be taken from the PDC information (SMART CLOCK).

1.Press MENU . The main menu will appear.

2.Select ‘GENERAL SET UP’ with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

3.Select ‘CLOCK’ with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

TIME --:--

DATE --/--/--

SMART CLOCK [ON]

END=EXIT

4.Check the time in ‘TIME’. If required, please change the time with 0..9 .

5.Check ‘DAY’, ‘MONTH’ and ‘YEAR’ in the same way.

6.Choose ‘SMART CLOCK’ ON or OFF with

FWD 1- B .

7.To end, press STATUS/EXIT .

Time/date is displayed incorrectly despite manual setting

With Smart Clock, time/date is taken from the TV channel saved on ‘P01’.

If you wish to switch this automatic time cor- rection off, select ‘OFF’ for Smart Clock.

You can reactivate this function at anytime by selecting ‘ON’ for Smart Clock.

7

EN

 

Image 9
Contents 14PV385/07 TvcrSpecifications Supplied accessoriesImportant notes regarding operation Brief Front of your Tvcr Back of your Tvcr Table of Contents Connecting the cable Connecting the TV-Video CombiConnecting additional devices Preparing the remote control for operationImportant notes for operation Installing your TV-Video CombiNavigation in the screen menu Preparation for useUsing the satellite receiver Automatic TuningManual TV channel search Sorting TV channels manually Setting the clockTV set functions Playback Searching for a tape position with picture scanning Index searchManual tracking Manual recording Switching off ‘RECORD LINK’ Selecting the recording speed SP or LP‘SP’/ ‘LP’/ ‘AUTO’ What is ‘PDC’? Programming a recording TimerError message ‘FULL’ Programming a recording with the Video Plus+ systemSwitching on ‘PDC’ Following message appears on the screen ‘ERROR’Programming a recording without the Video Plus+ system ‘- -’ appears at ProgProblems and solutions for programmed recordings How to change a programmed recording TimerHow to check or delete a programmed recording Timer Other functions Switching the status display off or onContinuous playback Blue Background on or offBefore you call an engineer Austria