Connecting to the TV, Connecting to the mains

Quick install Guide

Connecting to the TV

1Switch off your TV set.

2Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder.

3Insert one end of the supplied aerial cable into the TV

OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.

4Connect socket EXT1 TO TV-I/O or sockets S-VIDEO OUT (Y/C) , VIDEO OUT (CVBS) , AUDIO OUT L/R with the corresponding sockets of your TV set.

Connecting to the mains

Always check if the local mains voltage matches the voltage range printed on the type plate at the back or bottom of the DVD-recorder. If not consult your dealer or the customer support from your country.

1Switch on the TV set.

2Insert one end of the supplied mains cable into the mains socket

4MAINS at the back of the DVD recorder and the other end into the wall socket.

Initial installation

1Press STANDBY-ONm on the front of the DVD-recorder
P '' and then ' ' will appear on the display.	ENGLISH
2If necessary, select the programme number for the input socket at
the TV set.
P The initial installation menu appears on the screen.
Virgin mode
Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue

3Select your favourite setting using B or A . Confirm with OK .

4Proceed in the same way with the further menus: 'Audio Language', 'Subtitle', 'TV shape' , 'Country' .

P Autoinstall starts after the confirmation of the message 'If you have connected the antenna - press OK' using OK .

P When Autoinstall is complete, 'Autoinstall complete' will briefly appear on the TV screen.

5End with SYSTEM MENU .

6Press GUIDE/TV .

Setup

Home

Press Aor Bto select. Then press OK to confirm.

Setup
Choose item to set up :
Language	English
Country	United Kingdom
Postal code	XXXXX
External receiver 1	None
External receiver 2	None
External receiver 3	None

7Select line 'Postal code' and confirm with OK .

8Choose the entry position using C , D . Enter the local post code of your location using A , B , or the number buttons 0..9 .

O Depending on the country you select, you can also enter letters using B or A .

9Confirm the local post code with OK .

0To end, press GUIDE/TV .