Philips 15/20HF5234 manual Getting started, Switching on the TV, Connect the mains

4Getting started

4.1Before you start Warning

The connections do not have to be made before hanging but the cables must be inserted into connectors of the TV.

4.2 Connect the antenna

Insert the aerial plug firmly into the 75 Ω : aerial socket at the bottom of the TV and in the wall antenna socket.

4.4 Switching on the TV

•To switch on the TV, press the POWER key on the side of the set. A blue indicator comes on and after a few seconds, the screen lights up at the left hand bottom of the front of the set.

•If the TV set remains in standby mode (red indicator), press the PROGRAM – / + key on the side controls or the P – / + key on the remote control.

Connectors at rear of TV (facing downward)

4.3 Connect the mains

Side controls of TV

POWERPROGRAMMENUVOLUME

Insert the mains cord (supplied) into the mains socket at the backside (downward facing) of the TV and in the wall socket.

Warning

Verify that the mains supply voltage in your home corresponds to the voltage printed on the sticker at the rear of the TV.

Plasma	AC in
	LCD
TV
	TV

To wall	To wall
socket	socket

4.5 Using the Remote Control

Insert the 2 batteries supplied. Be sure the

(+)and (-) ends of the batteries line up correctly (inside of case is marked.)

7