Philips 15/20HF5234, 20HF5335D,26HF5335D, 32HF5335D manual Standby Last Status

Page 4
When set, the TV will always turn ON after the mains power is enabled. When set, the TV will always turn to STANDBY after mains power is enabled
When set, the TV will always turn to the last power status before the mains power was disabled.

OFF BDS Hotel Mode is OFF:

The TV operates as a normal consumer TV

SWITCH ON VOL

When the user switches the TV ON, it will play at the specified volume level. There are 2 options:

LAST STATUS Upon start-up, the TV volume will be set to the level before the TV set was last turned off.

USER DEFINED As specified by installer

Remark: “SWITCH ON VOL” cannot exceed the MAXIMUM VOL level. This is the volume level with which the Hotel Mode Setup menu was entered.

MAXIMUM VOL

The TV Volume will not exceed the selected volume level.

SWITCH ON CHANNEL

When the user switches the TV ON, it will tune to the specified channel. There are 2 options:

LAST STATUS The TV will switch on to the last channel that was shown before the TV set was turned off

USER DEFINED Any analogue channel can be chosen to be the first channel to switch on

POWER ON

The Power On function allows the TV to enter a specific mode of operation (On or Standby) after the mains power is activated.

ON

STANDBY

LAST STATUS

DISPLAY MESSAGE

ON Enables display of the Welcome Message for 30 seconds after the TV set is turned on OFF Disables the display of the Welcome Message.

If OSD DISPLAY is set to OFF, then the Welcome Message is automatically disabled.

WELCOME MESSAGE

The Welcome Message function allows the TV to show a customized greeting to the hotel guest whenever the TV is switched on. This helps to personalize the hotel experience for guests.

The Welcome Message can consist of 2 lines of text, with each line containing a maximum of 20 alphanumeric characters. Use the Remote Control arrow keys to create the Welcome Message.

To enable the display of the Welcome Message, the DISPLAY MESSAGE option must be ON To clear the Welcome Message from the TV’s memory, select CLEAR

LOCAL KEYBOARD LOCK

ON The television keys VOLUME +/-, PROGRAM +/- and MENU are blocked. OFF The television keys VOLUME +/-, PROGRAM +/- and MENU function normally ALL The television keys VOLUME +/-, PROGRAM +/-, MENU and POWER are blocked.

REMOTE CONTROL LOCK

ON Standard Remote Control keys are disabled.

OFF All Remote Control keys will function normally.

OSD DISPLAY

ON Normal screen information is displayed (e.g. programme information)

OFF Screen information is suppressed.

- 4 -

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Hospitality Television 20/26/32HF5335D 15/20HF5234 Installation of your Philips Hotel TV Switch on Settings Standby Last Status Cloning of settings Installation Procedure consists of three simple steps Problems and Solutions Disposal of your old product Page Country Number Tariff Austria 0820 Belgium 070 222Germany 0180 5 356 Luxemburg 40 6661 Local Netherlands 0900Standby Power Consumption for this set is less than 1 W RecyclingProduct information Disposal of your old productTable of contents Features 26.1 Using the TV in HD High Definition modeConnecting other equipment Troubleshooting GlossaryReduce contrast and brightness when viewing IntroductionImportant information Stationary images on the TV screen TipDigital or Analogue channels? What is digital TV?Mode. Use the P + / or to keys to select channels Safety GeneralLead during lightning storms Care of the screenProgram / + to select programmes Rear connectors Side connectorsSide controls CI Common Interface slot toSwitching on the TV Using the Remote ControlGetting started Connect the mainsSound mode Subtitles modeAnalogue or Digital mode Options See CancelVolume + VOL Digital menu13 OK MuteSetup Favourites List NameSetup Preferences Language Access restrictionsLocation Information System softwareSetup Installation Service lists Service setup Test receptionInstallation Factory default settingsUnderstanding the information on the banner Symbols descriptionBanner description Rearrange services Service listsView new TV channels or Listen to new Radio stations Service setup Add new servicesReinstall all services Select Reinstall all services ï and press Æ keyManual install services Press the key to start the installationSelect Manual install services ï and press Æ key Test reception Use the ï key to select Installation and press the Æ keyUse the Æ key to enter the Frequency Language default settings Location settingsPreferences Select Language or Location ï and press Æ keyAccess restrictions Setting up your favourite list Select TV channels use the Î ï keysInformation Off Air Downloading of new softwareUsing the Options menu Subtitle language use the Î ï keysTo temporarily change the language Confirm with key Press the white key to exit the menuPreset/Servcie Now Next TV GuideSubtitles for hearing impaired Subtitle language make yourOccurrence select Once, Daily or Not applicable for this model Digital teletext Mheg Available in U.K. onlySwitch off the TV Common Inserting the CAMModule Module slotATS Automatic Tuning System feature ACI Automatic Channel Installation featureEnter into Digital mode to do so refer to Preferenceson Press the ï key to select Auto StoreSystem SearchProgram No Fine TunePress the ï key to select Sort Key to enter sort mode Programme SortNaming of Channel Selecting your Favourite Programmes Timer FeaturesSelect Off option to deactivate the feature Parental Lock Lock ProgramChange Code Clear AllChild Lock Active ControlDescription of the Picture settings Picture and Sound settingsDescription of the Sound settings Definition of Picture Settings Definition of Sound SettingsSmart Picture and Sound NaturalScreen Formats Subtitle ZoomMovie Expand Super WideTeletext Hidden information Enlarge aPicture/Teletext Favourite pagesUsing the TV as a PC Monitor Control TV settings while in HD mode Connecting the HD equipmentSound menu SD format Supported formats HD format480i Connecting other equipment Overview of connectionsConnect VCR or DVD recorder With a eurocable As shown Connect the eurocableWith the aerial cable only Connect Decoder and VCRWith Component Video connectors Connect 2 VCRs or VCR and DVD recorder With eurocablesConnect the aerial cables 1 , 2 and 3 as shown With the aerial cables onlyAudio L and R jacks and to the L/R Audio jack of EXT4PC equipped with a DVI connector Supported PC resolutionsConnect a PC VGA connection is not supportedConnect a Camera, Camcorder Connect a Headphone Game console Troubleshooting Symptom Possible solutions No digital channels Picture in HD modeOne or a few tiny spots on Screen that do notGlossary Hdmi High-Definition Multimedia InterfacePage Hospitality Television 20/26/32HF5335D 15/20HF5234 Installation of your Philips Hotel TV Switch on Settings Standby Last Status Low Battery Check Installation Procedure consists of three simple steps Problems and Solutions Disposal of your old product
Top Page Image Contents