Philips BDL4251V user manual Advanced Option, Gamma Selection

User Manual BDL4251V

Main-Menu

ADVANCED OPTION

INPUT RESOLUTION * : INPUT VGA only

This feature makes the display controlling the source in order to match display capabilities by choice or automatically. You can select one of the following timings:

(1)1024x768, 1280x768, 1360x768 and 1366x768.

(2)640x480, 720x480 and 852x480

(3)800x600, 1064x600 and 720x576

(4)1400x1050 and 1864x1050

(5)720x400 and 640x400

AUTO: Determines the resolution automatically.

The setting you select becomes effective when POWER is turned OFF and ON again.

BLACK LEVEL EXPANSION * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only

Selects a level of black expansion from “OFF”,”LOW”, “MIDDLE” and “HIGH”.

In case of go under the black cut-off level, please adjust the “Black level” in moderation on OSD menu.

GAMMA SELECTION

Selects a display gamma. It refers to the brightness performance curve of signal input. 2.2 2.4

Sgamma Native

NOTE: sRGB picture mode is standard and cannot be changed.

SCAN MODE * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only

Changes the display area of the image.

OVERSCAN: Set to display area about 95%

UNDERSCAN: Set to display area about 100%

SCAN CONVERSION * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only

Selects IP (Interlace to Progressive) converter function.

PROGRESSIVE: Enable the IP function, to convert interlace signal to progressive. Normally use this setting.

INTERLACE*: Disable the IP function.

*NOTE: This mode is better suited for motion pictures, but it increases chance of image retention.

38