Philips BDL4251V Method II Mount the monitor on the wall, To avoid monitor from falling

Page 15
Screw here is not supplied.

User Manual BDL4251V

To avoid monitor from falling

Take measures to prevent the monitor from falling over in case of an earthquake or other disaster might occur to lessen the probability of injury and damage.

As shown in the figure below, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor(BDL4251V: approx. 47.5 kg). Screw hooks (commercially available), of ring type rather than C-shaped screw hooks (with opening), are recommended.

Caution:

Though the recommended prevention from falling is intended to lessen the probability of injury and damage, it doesn’t assure its effectiveness against any kind of earthquake or disaster.

Before moving the monitor, remove the rope that is securing the monitor.

Method II: Mount the monitor on the wall

Before mounting the monitor to the wall, make sure that the system has been power-off and you have obtain a standard wall-mounting kit (commercially available). Using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America is recommended.

1.Lay a protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the surface as not to scratch the screen face.

2.This device cannot be installed without the correct and complete mounting accessories (not provided in the box). Make sure you have all related parts available for wall mounting.

3.Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

4.For the wall-mounting kit, use M6 mounting screws for 400x 400 mm pattern (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them securely. (Recommended torque: 470 - 635N•cm).

Caution:

For preventing the monitor from falling.

Install the monitor with metal brackets for wall or ceiling installation (commercially available) on your own responsibility. For detailed procedures of installation, refer to the instructions of the metal brackets.

To lessen the probability of injury and damage resulting from fall of the monitor in case of earthquake or other disaster, be sure to consult the bracket manufacturer for installation location.

To lessen the risk of falling of the monitor, thread commercially available rope (having a load capacity at least 1960N (200kgf)) through the handles at the right and left of the monitor and secure the rope to the wall mount brackets or ceiling mount brackets.(Refer to the first paragraph of this page.)

14

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Public Signage Solutions Table of Contents Safety Instructions Regulatory Information CE Declaration of Conformity Polish Center for Testing and Certification Notice Information for UK only 中国电子信息产品污染控制标识要求中国RoHS法规标示要求产品中有毒有害物质或 元素的名称及含量 North Europe Nordic Countries Information Contents Control Panel Connection & Button OverviewsVideo IN/OUT Terminal PanelPower button Remote ControlHandling the remote control Operating Range for the Remote ControlMethod 1 Attach and remove the optional stands How to Mount or Attach Feet to the LCD MonitorTo avoid monitor from falling Method II Mount the monitor on the wallVentilation Requirements for enclosure locating Setup Procedure Adjust the image Recommended AdjustmentTo prevent the main power switch from being changed How to set-up Install the LCD Monitor in Portrait ModeConnectivity Diagram ConnectivityBefore making connections Connecting the LCD Monitor to a Personal Computer Connecting to a Personal ComputerConnect the LCD Monitor to a Computer with a Digital Output Connecting to a Digital Interface EquipmentConnect the LCD Monitor to a DVD Player Connecting to a DVD PlayerConnecting to a Stereo Amplifier Connecting to a display mounted PCConnect the LCD Monitor to a Stereo Amplifier Using the remote control Power on and OFF ModesPressing the Main Power Switch Pressing the power buttonPicture Size Power IndicatorUsing Power Management Display Signal of Video Source Setting to VideoOSD Information Smart Picture ModeAudio Source Switching Control Lock ModeOSD On-Screen-Display Controls Black Level BrightnessContrast SharpnessLight Sensor Color TemperaturePicture Reset Color ControlPosition Zoom ModeCustom Zoom Screen ResetBass Audio ResetBalance TreblePIP Reset PIP SizePIP Audio Power Save LanguagePanel Saving Factory Reset Configuration ResetOSD H Position Sleep TimerOSD Turn OFF Information OSDMonitor Information Gamma Selection Advanced OptionDate and Time IR ControlKeyboard Control TilingMonitor ID Smart PowerAdvanced Option Reset ScheduleFor long life use of Public Display Image Sticking of LCD PanelRecommendations Component Video Remote control numbering functionPixel defect policy BDL4251V Bright DOT Effect Acceptable Level Full HD LCD display 1920x1080p FeaturesTroubleshooting No Sound Remote Control does not workSchedule / Sleep Timer function is not working properly No Signal is displayed on the screenSpecifications BDL4251V SpecificationsSDA Pin Assignment
Top Page Image Contents