User Manual BDL4251V
Specifications
Specifications (BDL4251V)
Product Specifications | Analog Input |
| Digital Input | |
|
|
|
|
|
LCD Module | Diagonal: | 42" / 106.7 cm |
|
|
| Pixel Pitch: |
|
| |
| 0.485 mm |
|
| |
| Resolution: |
|
| |
| 1920 x 1080 dots |
|
| |
| Color: |
|
| |
| 1.07 billion colors (depending on video card used) | |||
| Brightness: | 700 cd/m2 (typ.) |
|
|
| Contrast Ratio: | 1,000:1 (typ.) , 3,000:1witch Smart Contrast |
| |
| Response time: | 9 ms (typ. G to G) |
| |
| View Angle: | Up and Down 178°, Left and Right 178° (typ.) | @CR>10 | |
Frequency | Horizontal: | 15.625 / 15.734, 31 - 91 kHz |
| |
| Vertical: | 50.0 / 58.0 - 75.0 Hz |
| |
Pixel Clock |
| 13.5 |
| 25.0 |
Viewable Size |
| 930.25 x 523.25 mm / 36.6 x 20.6 inches |
| |
Input Signal |
| Analog RGB Video: 0.7 |
| |
Video: | TMDS | |||
|
| Input impedance 75 ohm |
| |
| Sync: | Separate HV sync: TTL level (Pos./Neg.),Input Impedance 2.2K ohm | ||
| 15 Pin Mini |
| HDMI | |
VIDEO Input: |
| Composite: 1.0 |
| |
|
| Input impedance 75ohm BNC and | ||
|
| Y/C Y: 1 | C: 0.286 |
|
|
| Impedance 75 ohm |
| |
|
| Component: 1.0 / 0.7 |
| |
|
| Input Impedance 75 ohm |
| |
AUDIO Input: |
| RCA | ||
RS232C: | In: | 9 Pin Mini |
|
|
Output Signal |
|
|
|
|
Video: | Analog RGB Video: 0.7 | |||
| Sync: | |||
| Separate HV sync: TTL level (Pos./Neg.) |
| ||
|
| |||
VIDEO Output: | 15 Pin Mini |
|
| |
|
|
| ||
| ||||
AUDIO Output: |
| |||
| RCA | |||
Speaker Output: |
| |||
| Internal Speaker | 5 W + 5 W (8 ohm) |
| |
|
|
| ||
RS232C: | Out: | External Speaker Jack 7 W + 7 W (8 ohm) |
| |
9 Pin Mini |
|
| ||
|
|
|
| |
Resolutions Supported | 640 x 480 at 60 Hz |
| ||
|
|
| ||
|
| 800 x 600 at 60Hz |
| |
|
| 1024 x 768 at 60Hz |
| |
|
| 1280 x 720 at 60Hz |
| |
|
| 1280 x 768 at 60Hz |
| |
|
| 1360 x 768 at 60Hz |
| |
|
| 1600 x 1200 at 60 Hz |
| |
|
| 1900x1200 (reduced Blanking only) |
| |
|
| 1920 x 1080 at 60Hz* |
| |
|
| * Recommended Resolution |
| |
|
| NTSC,PAL,SECAM,4.43NTSC,PAL60 DVD:480i,480p, 576i,720p,1080i,1080p | ||
|
|
|
| |
Power Supply |
| 2.4 – 1.2 A @100 - 240 V AC, 50 ~ 60 Hz |
| |
Power Consumption |
| Typically 232 W |
|
|
| Power Save: | Less than 1W (Power button off or main power switch off.) | ||
Operational | Temperature: | Landscape: 5 - 40 °C / | ||
Environment | Humidity: | 20 - 80 % (Without condensation) |
| |
Storage | Temperature: |
| ||
Environment | Humidity: | 10 - 90% (Without | ||
Dimension | Net without stand: | 967.6 mm (W) x 559.6 mm (H) x 123.1mm (D) / 38.09" (W) x 22.03" (H) x 4.85" (D) | ||
| Net with stand: | 967.6 mm (W) x605.6 mm (H) x 405 mm (D) / 38.09" (W) x 23.84" (H) x 15.95" (D) | ||
| Gross: | 1170 mm (W) x 715 mm (H) x 286 mm (D) / 70.87" (W) x28.15" (H) x11.26" (D) | ||
Weight | Net without stand: | 48.5lbs / 22 kg |
|
|
| Net with stand: | 52.47 lbs / 23.8 kg |
| |
| Gross: | 68.78 lbs / 31.2kg |
|
|
Wall mounting interface | 8 Holes (400 mm pitches) |
| ||
Optional |
| |||
|
|
| ||
Complied Regulatory and Guidelines | ||||
Power Management |
| Support VESA DPMS convention |
| |
Plug & Play |
| VESA DDC2B, DDC/CI |
| |
|
| CD User's Manual, QSG, Power Cord, VGA Cable, BNC TO RCA adapter x 5, Remote |
| Controller, AAA Battery x 2, Clamper x 2 (To prevent from falling), Cable belt x 3 (For | |
Accessories | ||
securing cables), Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable Holder x | ||
| ||
| 2, Main switch cover. |
Note: Technical specifications are subject to change without notice.
48