User Manual BDH5011
11.3For Component Video (480p,
720p and 1080i signal) - Con’t
Accessing Geometric Adjustment Mode
Various geometric adjustments can be set using the Geometric Adjustment OSD menu.To access the Geometric Adjust
1Press the MENU +/- keys on the remote or the front control panel.
2The First menu displayed is the PICTURE Menu. Make sure that the PICTURE OSD Menu is displayed.
3Use the MENU +/- keys to set the selection to ON. As soon as you press the button, the Geometric Adjust
4Press the ADJ +/- keys to move up and down to choose the option you wish to adjust. An explanation of each adjustment is listed below.
5Use the ADJ +/- keys to change the setting.
V-SIZE
Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical direction. Decrease to reduce the picture size in the vertical direction.
V-CENTER
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture down.
H-WIDTH
Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction. Decrease to reduce the picture size in the horizontal direction.
H-POSITION
Use to change horizontal position of the picture. Increase to shift the picture to the right. De- crease to shift the picture to the left.
RETURN
Return to PICTURE OSD Menu.
44