Philips BDH5011 user manual Selecting Signal Source, Using Direct Input Selection Keys

User Manual BDH5011

INPUT SELECT (Toggle)

DIRECT INPUT SELECTING KEYS

8.2 Selecting Signal Source

Using Front Panel or Remote Control

1.Press the INPUT key on the front panel or the INPUT SELECT key on the remote control.

2.Pressing the INPUT key will cycle the display through all available input signal sources in the following order:

AV S-VIDEO COMPONENT1

DVI RGB COMPONENT2

Using Direct Input Selection Keys

1.If you prefer not to cycle through all available inputs, you can use the Direct Input Selection keys located at the bottom of the remote control.

2.Simply select the input that you would like to switch to and press the Direct Input Selection key for that input.

Notes:

•Some of the Direct Input Selection keys will not be applicable for this display.

For AV mode, use AV1. For S-Video, use AV2.

24