4.6 Features Menu
1Press 
2Select [Setup]then pressOK
>Select [Features]
3Select one of the following settings then
Press 
to move, and press 
to adjust.
OSD Duration
Picture
Hotel Mode Control
Sound
Back Light
|
| Features | Sleep Time |
|
| ||
|
|
|
|
Factory Settings
Installation
HDMI CEC
Blueback
•[OSD Duration] :This function is used to OSD timeout in step of 15,30,45,60 secs.
•[Hotel Mode Control] :Hotel mode control selection.
Notes:
The default password is 0000, and the master password is 8202.
•[Back Light] :Adjust the back light brightness.
•[Sleep Time] :This function is used to ON/OFF step of 10,20,30,60,90,120,180,240 mins.
•[Factory Settings] :This function is used for Reset to factory default settings.
•[HDMI CEC] :HDMI CEC ON/OFF switch.
•[Blueback] :This function is used to ON/OFF the blue screen at no signal condition.
| Hotel Mode Switch | Off |
Picture | Set Password |
|
|
| |
Sound | Panel Key Lock | Off |
Features | Max Volume |
|
|
| |
| Start Source | TV |
Installation | Start Channel | 1 |
| ||
| Volume Default |
|
| Input Source Change | On |
[Features in Hotel Mode Control] :
•[Hotel Mode Switch]: This function is used to ON/OFF the hotel mode.
•[Set Password]: This function is used to set the new password to access the hotel mode control.
•[Panel Key Lock]: This function is used to ON/OFF the panel pad key lock or unlock.
•[Max Volume]: This function is used to limit the max volume in TV.
•[Start Source]: This function is used to set the signal source after TV power on.
•[Start Channel]: This function is used to set the access channel after TV power on.
•[Volume Default]: This function is used to set the default volume value after TV power on.
•[Input Source Change]: This function is used to ON/OFF the input source change after TV power on.
Note
•All above features would be available in hotel mode switch is on.
Hotel Mode Control
Back Light
[Features in VGA Mode] :
•[Auto Adjust]: This automatically adjust H &
•
•
•[Clock]: Adjust the picture if not in sync with TV screen.
•[Phase]: Adjust the picture if there is any blurring or shimmer in text.
[Only in VGA].
4.7Installation Menu
EN 13