Philips 50PFL3807 user manual Initial setup, Stop, Skip, Wireless

Page 13

These operations are accessible by remote control.

Some may also be accessible by control panel on the main unit.

Initial setup

This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu, country, location and AutoProgram, which automatically scans and memorizes viewable channels.You can also set the network connection in this setting.

Before you begin:

Make sure the unit is connected to antenna or cable.

1 After making all the necessary connections, press to Turn On the unit.

• It may take a few moments to Turn On the unit for the first time.

• Initial setup menu appears automatically after the unit is Turned On.

2 Use ▲▼ to select the on-screen language, country, location on the right side of the TV screen, then press OK.

You must set Home in location setting. Otherwise, Picture and Sound settings you adjusted will not be memorized after the unit goes into Standby mode.

3Use ▲▼ to select the signal type.

If the TV is connect to a cable box or satellite set-top box, select the 2nd one and skip to step 5.

To set up a TV signal from a cable TV

Select

wall jack or a standard TV antenna.

 



 

To set up a TV signal from a cable TV

Select

box or satellite TV receiver.

 



 

4Use ▲▼ to select Antenna for TV channels or Cable for CATV channels, then press OK.

Make sure that you have

Antenna

attached your antenna or cable

signal into the jack on the back

 

of your TV labeled “ANTENNA. IN”.

Cable



 

Now select either Antenna or

Skip

Cable, using up/down key of the

 

remote control. Once you have

 

made you selection, press the

 

OK button to proceed.

 



 

––When Antenna is selected, the TV detects antenna signals. It searches for DTV and Analog TV channels available in your area.

––When Cable is selected, the TV detects signals supplied by cable. It searches for DTV, Analog TV and Cable channels available in your area.

Autoprogram will begin.

13 English

System searching. Please wait...

Digital channels found:

0

Analog channels found:

0

Auto programming may take more than 20 minutes to complete. Digital channels will take longer than Analog to find and program. Please wait until you see

the Auto Programming complete message.



Stop

5After the channel installation is completed, Network setup screen will appear. Use ▲▼ to select Wireless or Wired, then press OK.

This TV can be connected to

Wireless

your home network.

Select your connection type.

Wired

 

Skip

Wireless

If you have a router with WPS function, select

Wireless to connect to the Internet.

 

 

 

Wired

If you connect with an Ethernet cable, select

Wired to connect to the Internet.

 

If you select Wireless, use ▲▼ to select Easy Connect and press OK.

6Follow the on-screen instructions to complete the installation.

When you select On in the selection screen of

Auto software update. A message will appear if there is the latest software on the network server.

7Use ◄► to select Start, then press OK to begin Settings assistant.

Settings assistant will allow you to customize your picture settings to your personal preference.You will see a series of test pictures where

the right side and left side differ. Select the side that is most pleasing to you with the Left/ Right buttons.

Cancel

 

Start

8Press ◄ or ► 5 times to select the side of the pictures that is the most pleasing to you, then press OK.

Which side of the picture do you prefer?

Cancel

Picture

A

Picture B

Continued on next page.

Image 13
Contents ES Manual del Usuario FR Manuel d’Utilisation 50PFL3807 Contents Product Safety Notification Wall Mount Bracket Kit Warranty Pixel characteristicsFederal Communications Commission Notice ModificationsVudutm is a trademark of VUDU, Inc CopyrightYouTube and the YouTube logo are trademarks of Google Inc Regulatory notices Positioning the TVEnvironmental care End of life directivesSupplied accessories FeaturesGet started DTV /TV / CATVSlide the battery cover off the back of the remote control Installing the remote control batteriesAttaching the base Management tie at the back of the TVPOWER-ON / STANDBY-ON Remote control functionPREV.CH Terminals Control panelBoxes C d ePlugging in the AC power cord Connecting the antenna or the cableWireless Initial setupStop SkipPress OK to finish Settings assistant After an initial setup is completedAdjusting volume Switching on your TV and putting it in Standby modeSwitching channels Use your TVEnable or disable RC key forwarding from the Home menu Access the Home menuWatching channels from an external device Guide to Home menuView photos, play music and watch videos using Dlna Philips Wireless MediaConnectListen to music using Dlna View your pictures using DlnaWatch videos using Dlna Guide to DlnaNet TV Video playback Enjoying vTunerAdd to Favorites Remove from FavoritesAdd to favorite list Internet radio playbackRemove from favorite list Add stations on the vTuner websitePandora operations Logging in to Twitter Using TwitterGuide to Twitter Home screen Viewing tweets on the TVDisplaying Mentions on Twitter Viewing Favorites on TwitterViewing Lists on Twitter Viewing Trends on TwitterSleep timer Using auto modeCreate and use lists of favorite channels For 169 video signal For PC Input signalFor 43 video signal Changing picture formatPicture Jpeg Video Music MP3Use more of your TV You must set Home in Location. p Picture Settings assistant Start nowAuto picture Personal Brightness Color Tint SharpnessDynamic backlight Medium Film modeAlignment EnhancementAVL Caption settings Child and ratings lock SleeptimerClosed captions Channel lock Start now Channel lock TV ratings lock Movie ratings lockChannel lock Setting TV and movie ratingsChild lock Movie ratings lock TV-MALanguage Change PINCanada English or Canada French ratings Weak channel installation Channel installationInstallation mode Uninstall channelsPreferences Setting your location to homeUse Philips EasyLink StickerDevice list EasyLinkHdmi HDMI-ARCManual network settings Network settings assistantNetwork WPSManually enter your Ssid AutoAuto Router Enter Key NoneConnection test IP configurationPreparing for the software upgrade Return your settings to default valuesChecking your current software version Automatically check for latest software Upgrading the softwareNetflix deactivation Netflix ESNConnecting your devices Connecting devicesSelecting your connection quality HDMI-ARC connection Connecting the TV to the Internet using an Ethernet cableComponent Analog Video Connection Composite Analog Video ConnectionDigital Audio Output Connection Connecting the TV to the Internet using a wireless LANPC connection USB Memory Stick Following video signals can be displayedUseful tips TroubleshootingBroadcast signal No picture or sound Check if the Power is OnAdjust Contrast and Brightness in Picture settings. p Switch various screen modesWPA or WPA2 recommended mode Cannot use the wirelessCheck the firewall setting of the modem or router ConnectionInformation MaintenanceGlossary Power requirements 120V~ AC +/− 10%, 60Hz +/− 0.5% SpecificationsModel # 50PFL3807 Type FHD 1920 x 1080 pixels 60HzContact the Customer Care Center at 1 866 309 WarrantyLicense No Warranty Lgpl Page Page USA MIT BSD Minix Adpcm Page Xii Philips and Philips Shield are used under license