Philips 50PFL3807 user manual Dynamic backlight Medium, Alignment, Enhancement, Film mode

*You can set a particular about picture quality in Advanced picture.

31

to select the desired setting, then press OK

(Red, Yellow, Green, Cyan, Blue and Magenta)

English

Auto picture

Backlight

Contrast

Brightness

Color

Tint

Sharpness

Advanced picture

Color alignment	Mode
Noise reduction	Auto
Light sensor	On
Black stretch	Medium
Dynamic contrast	Medium
Gamma
MPEG artifact reduction	Medium
Dynamic backlight	Medium

		Cursor ◄	Cursor ►
		to rotate only	to rotate
			only selected
	Tint	selected color
			color tint in
Custom		tint in clockwise
			counterclockwise
color		direction	direction
management
	Saturation	to decrease color	to increase color
		with only selected	with only selected
		color	color
		to decrease	to increase
	Brightness	brightness with	brightness with
		only selected	only selected
		color	color

		to set the color temperature to
	Mode	Personal, Cool, Normal and Warm
		When you adjust the following
		settings, Personal will be set
		automatically.
		Cursor ◄	Cursor ►
	Red gain	to decrease	to increase
		contrast with red	contrast with red
	Green gain	to decrease	to increase
		contrast with	contrast with
Color		green	green
alignment	Blue gain	to decrease	to increase
		contrast with blue	contrast with blue
	Red offset	to decrease	to increase
		brightness with	brightness with
		red	red
	Green offset	to decrease	to increase
		brightness with	brightness with
		green	green
	Blue offset	to decrease	to increase
		brightness with	brightness with
		blue	blue
Noise	to select the desired setting, then press OK
reduction	(Off, Minimum, Medium, Maximum and Auto)
	Off	to set Light sensor to Off
Light sensor		to adjust backlight for the best picture
	On	quality by dynamically adjusting the
		backlight intensity in accordance with
		lighting condition in the room
Black	to select the desired setting, then press OK
stretch	(Off, Minimum, Medium and Maximum)
Dynamic	to select the desired setting, then press OK
contrast	(Off, Minimum, Medium and Maximum)
Gamma	Cursor ◄		Cursor ►
	to adjust the gamma encoding of images
MPEG	to select the desired setting, then press OK
artifact
	(Off, Minimum, Medium and Maximum)
reduction
Dynamic backlight	to select the desired setting, then press OK
	(Off, Minimum, Medium and Maximum)
Color	Off	to set color enhancement to Off
enhancement	On	to make colors more vivid and bright

Film mode	Off	to set film mode to Off
	Auto	to optimize the picture recorded by
		the original film

Note

••Mode selection is available only if

––the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.

––the connected HDMI device is outputting a video signal.

••Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when Light sensor is set to On. Please ensure the room lighting is stable and the light sensor is not blocked.