8 Information
Glossary
Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards.
ARC (Audio Return Channel)
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices with CEC feature and this unit.We do not guarantee 100% interoperability with other brands of CEC compliant devices.
Component Video
This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines.This allows the viewers to experience picture colors as original as it is.There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress Digital sound. It offers stereo sound (2ch) or
DTV (ATSC)
Acronym that stands for Advanced Television Systems Committee and the name of the Digital broadcasting standards.
E-sticker
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, Digital Audio /Video formats including
HDTV (High Definition TV)
Ultimate Digital format that produces high resolution and high picture quality.
PIN code
A stored
SAP (Secondary Audio Program)
SDTV (Standard Definition TV)
Standard Digital format that is similar to the Analog TV (NTSC) picture quality.
SRS TruSurround HD™
52 English
Maintenance
Cabinet Cleaning
•Wipe the front panel and other exterior surfaces of the unit with a soft cloth.
•Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
Panel Cleaning
Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the AC power cord.
Servicing
Should your unit become inoperative, do not try to correct the problem yourself.There are no user serviceable parts inside. Call our toll free customer support line found on the cover of this User Manual to locate an authorized service center.
IR Signal Check
If the remote control is not working properly, you can use a Digital camera (including a cellular phone with
With a Digital camera
(including
Point the Digital Camera towards the remote control infrared diode at the front of the remote control. Press any button on the remote control and loOK through the camera display. If the infrared pulsating light appears through the camera, the remote control is sending out an IR signal.
Creates an immersive,