Automatic Channel Set-up

Channel

Auto Tuning

Intelligent Tuning

Manual Tuning

Fine-Tune 42.25HZ

Sound System

Programme Edit

Manual Tuning

Current Channel	1
Band	VHFL
Search	49.70 Mhz
Press MENU to return	Press EXIT to exit

Channel set-up involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter.

Display the menu by pressing the MENU button. Press the left or right direction button to select the Channel icon and press the up or down direction or OK button to display the Channel menu.

1.Press the up or down direction button to select the Auto Tuning option.

2.Press the left or right direction button or OK button to start channel search.

Note: Depending on the number of channels you receive, it may take several minutes for the channel search to finish. If you want to interrupt the process, press the MENU button. The channels already found will be stored.

Always start tunning from channel number 1.

3.Channels are arranged in a pre-set order. Refer to the following sections if you want to fine tune or skip a channel, or swap two channels.

Intelligent Channel Set-up

This operation will keep all the existed channels and add newly found channels to the end of the channel list.

1.Activate the Channel menu and press the up or down direction button to select the Intelligent Tuning option.

2.Press the left or right direction or OK button to start intelligent tuning.

Note: If you want to interrupt the process, press the MENU button. The channels already found will be stored.

Manual Channel Set-up

Follow the below procedure if you find that some channels have not been stored after the automatic set-up as well as the intelligent set-up.

1.Activate the Channel menu and press the up or down direction button to select the Manual Tuning option.

2.Press the right direction or OK button to enter the Manual Tuning menu.

3.Select the Current Channel option and press the left or right direction button to select a channel number to store the channel that will be found.

4.If necessary, press the up or down direction button to select the Band option and press the left or right direction button to toggle among VHFH, UHF and VHFL.

5.Press the up or down direction button to select the Search option and press the left or right direction button to search manually.

6.Press MENU to return or EXIT to close the menu.

Fine Tuning a Channel

If the picture is not clear you can fine tune the channel.

1.Activate the Channel menu and press the up or down direction button to select the Fine-Tune option.

2.Press the left or right direction button for fine tuning

3.Press MENU to return or EXIT to close the menu.

EN 9