Frequently Asked Questions, Showing photo

Photo

Music Show

Photo Show

Auto Play

1	2 USB 2.0
	Return	C

Showing photo:

1.Activate the Photo menu and press the up or down direction button to select the Photo Show item and press the left or right direction or OK button to enter the USB interface.

2.Press the left or right direction button to select the USB disk symbol and press OK to enter.

3.Press the up, down, left or right direction button to select a photo file, then press OK to show.

4.You can press the OK button to pause or continue to play, press the up or down direction button to select the last or next photo, press EXIT to stop playing, press the red button to rotate the photo, press the blue button to zoom the photo, press the yellow button to set the photo as open picture.

5.Press Exit to exit.

Auto play

1.Activate the Photo menu and press up or down direction button to select the Auto Play item and press the left or right direction or OK button to enter the USB interface.

2.Press the left or right direction button to select the USB disk symbol and press OK to auto play the picture and music simultaneously.

Note: This function is only available when the pictures and music are synchronously located in the USB root catalog.

6 FAQ

Attention:

1.Some non-standard mobile storage device may/may not be recognized. Please change to use the standard device.

2.This system supports the following file formats: Picture format: JPEG BMP PNG

Video format: H.264 RM/RMVB XVID MPEG4 MPEG2 MPEG1, etc..

Audio format: MP3 WMA

Note: For coding files, there are many kinds of non-standard coding method, so this system can not be guaranteed to support the file formats using any coding method.

Frequently Asked Questions:

1.Under the following conditions, this system can not decode the file and the file can not play normally:

-The parameters of file, such as the pixel of picture, code rate of audio and video file, sampling rate of audio file, exceed the limit of the system;

-The format of file is not matched or the file is harmed.

Note: The code rate this system supports does not exceed 20Mbps.

2.Hot plug: Do not disconnect when the system is reading or transmitting data,

avoid damaging the system or the device.

3.Pay attention to the power supply of the device when you are using a mobile hard disk or a digital camera. If the power supply is not sufficient or not stable, you may encounter problems during operating or can not operate at all. In this case, please restart the device, or unplug the device and plug it again, and ensure that its power supply is normal.

4.The system supports standard USB1.1 and USB2.0 devices, such as standard U-disks, MP3 players, mobile hard disks, etc..

5.For obtaining better audio and video quality, suggests to use the external device which accords with USB2.0 standard.

6.Connecting two USB hard disk devices simultaneously can cause to slow the speed of reading or other problems, suggests to connect two U disk or one USB hard disk and one U-disk simultaneously.

7.When playing the video with high compression ratio, these phenomenons, such as picture standstill and menu long time response, are normal.

8.For some USB device with power supply, such as large size hard disk, MP4, etc., Suggests using it with power to avoid electric power shortage.

EN 15