Sony TA-AV561A manual Troubleshooting, 14EN

Page 14

Additional Information

Troubleshooting

If you experience any of the following difficulties while using the amplifier, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

There’s no sound or only a very low-level sound is heard.

/Check that the speakers and components are connected securely.

/Make sure you select the correct component on the amplifier.

The left and right sounds are unbalanced or reversed.

/Check that the speakers and components are connected correctly and securely.

Severe hum or noise is heard.

/Check that the speakers and components are connected securely.

/Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3 meters) away from a TV set or fluorescent light.

/Place your TV away from the audio components.

/The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

No sound is heard from the centre speaker.

/Select the DOLBY sound field (see page 10).

/Select the appropriate centre mode (see page 11).

/Adjust the speaker volume appropriately (see page 12).

No sound or only a very low-level sound is heard from the rear speakers.

/Make sure you turned on the surround mode or sound field function.

/Select the appropriate centre mode (see page 11).

/Adjust the speaker volume appropriately (see page 12).

Surround effect cannot be obtained.

/Turn on the surround mode or sound field function.

No sound, or only a very low-level sound is heard when adjusting the test tone.

/Turn MASTER VOLUME clockwise.

Recording cannot be made.

/Check that the components are connected correctly.

/Select the source component with the function buttons.

The remote does not function

/Point the remote at the remote sensor gon the amplifier.

/Remove the obstacles in the path of the remote and the amplifier.

/Replace both batteries in the remote with new ones if they are weak.

/Make sure you select the correct function on the remote.

Power does not turn on when you press SYSTEM POWER on the remote.

/Press POWER on the front panel to turn on the power if the STANDBY indicator is not lit (see page 8).

14EN

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Integrated AV Amplifier Precautions Table of Contents Hookup Overview When to replace batteriesUnpacking Inserting batteries into the remoteHookups Audio/Video Component HookupsOverview AmplifierVCR Speaker System HookupsLD Player/TV game AmplifierLDAC Hookups Setting the voltage selector except forConnecting the mains lead Using the remote Selecting a ComponentRecording on an audio tape or video tape Audio signal flow Recording component Tape deck, VCRRecording Function buttons10EN Choosing a Surround ModeWhen you use the remote For tapes/discs with SelectIf you have Select So that Selecting the centre mode11EN You can adjust all speakers at one time Adjusting the speaker volumeAdjusting the delay time 12EN13EN Using Preset Sound FieldsUsing the Superwoofer Press To reproduceTroubleshooting 14ENAmplifier section Specifications15EN GeneralGlossary 16EN17EN 18EN Rear Panel DescriptionsRemote Operates Function Button Remote Button Descriptions19EN 20EN Surround Mode FieldsChoosing a Example Playing a CD21EN Avertissement Précautions Fonctionnement de l’amplificateur Au sujet de ce manuelPréparatifs Utilisation de champs sonoresDescription des raccordements Mise en place des piles dans la télécommandeDéballage Avant de commencerRaccordements Raccordement de composants audio/vidéoAperçu Lecteur LD/Console de jeu vidéo Raccordement d’enceintesMagnétoscope Raccordement au courant secteur Branchement du cordon d’alimentation secteurUtilisation de la télécommande Sélection d’un composantEnregistrement sur une cassette audio ou vidéo Sens du signal audio ComposantEnregistrement Touches de fonction10F Sélection d’un mode surroundSi vous utilisez la télécommande Sélectionnez Pour Cassettes avecSi vous avez Sélectionnez Pour que Sélection du mode de canal central11F Réglage du temps de retard Réglage du volume des enceintes12F Vous pouvez régler toutes les enceintes simultanément13F Utilisation des champs sonores préréglésRenforcement du grave Appuyez sur Pour reproduireGuide de dépannage 14FSection amplificateur Spécifications15F GénéralitésGlossaire 16F17F 18F Description du panneau arrière19F Description des touches de la télécommandeCommande Contrôle Fonction De musique 20FExemple Lecture d’un CD Classique21F Advertencia Precauciones Operaciones del amplificador Descripción de este manualPreparativos Utilización de campos acústicosColocación de las pilas en el telemando DesembalajeDescripción general de las conexiones Antes de comenzarConexiones Conexión de componentes de audio/vídeoDescripción general Reproductor de discos láser Juegos de televisión Conexión de sistemas de altavocesVideograbadora Conexión de los cables de alimentación Conexión de CAAjuste del selector de tensión excepto para Selección de un componente Utilización del telemandoGrabación Grabación en una cinta de audio o de vídeoCuando utilice el telemando Elección de un modo perimétrico10E Para cassettes Seleccione Discos conSi posee Seleccione Para que 11ESelección del modo central Ajuste del tiempo de retardo Ajuste del volumen de los altavoces12E Usted podrá ajustar todos los altavoces a la vezPresione Para reproducir Utilización de supergraves13E Para desactivar los efectos perimétricosSolución de problemas 14E15E EspecificacionesGlosario Sección del amplificador16E 17E 18E Descripción del panel posteriorTecla del Controla Función Telemando Descripción de las teclas del telemando19E Componente Perimétrico Campos acústicos Programados Selección de unUtilización de 20E

TA-AV561A specifications

The Sony TA-AV561A is a remarkable audio amplifier that has captured the attention of audiophiles and casual listeners alike since its inception. This device is known for its powerful performance, versatile connectivity, and user-friendly features, making it an attractive choice for those looking to elevate their home audio experience.

At the heart of the TA-AV561A is its robust amplification system. Featuring a total output of 100 watts per channel, this amplifier is designed to drive a variety of speakers with ease, providing a rich and immersive soundstage. The amplifier employs a high-efficiency Class A/B design, which allows it to deliver crisp highs and deep bass without sacrificing clarity. This makes the TA-AV561A suitable for various music genres, from classical to rock, ensuring that every note is rendered with precision.

One of the standout features of the TA-AV561A is its extensive range of connectivity options. The amplifier provides multiple input sources, including phono, CD, and tape inputs, making it easy to connect to a wide array of audio components. Additionally, it includes both analog and digital outputs, allowing users to integrate modern devices seamlessly. This versatility makes the TA-AV561A an excellent choice for users looking to build a comprehensive home audio setup.

In terms of sound customization, the TA-AV561A is equipped with a range of tone controls, including bass and treble adjustments. Users can tailor their listening experience to fit their personal preferences or the acoustics of their environment. The built-in loudness control also enhances low-level listening by boosting bass frequencies, making it ideal for late-night sessions when lower volume levels are preferred.

Another notable characteristic of the TA-AV561A is its thoughtful design. The amplifier features a sleek and stylish chassis that fits well in any living room or entertainment setup. Its user-friendly layout ensures that users can easily access controls and inputs.

In summary, the Sony TA-AV561A stands out as a top-tier audio amplifier with a powerful output, extensive connectivity, and customizable sound options. Its blend of technology and design makes it an enduring choice for anyone who prioritizes high-quality home audio.
Top Page Image Contents