Philips 42-50-63PF9631D/37 Select your source, Digital Audio, Set your clock, Auto clock mode

EN Use of the Setup menu (continued)

Settings
Setup	Source
Preferences	AV1
Source	AV2
Clock	AV3
	HDMI 1
	HDMI 2
	Side
	Digital Audio In
Info

Select your source

This menu allows you to identify the accessory devices you have connected to the external inputs/outputs.

1.Select Source in the Setup menu.

2.Press the cursor right to enter the list of types of external inputs.

3.Select the appropriate input with the cursor up/down.

>When you select AV1, AV2, AV3, HDMI 1, HDMI 2 or Side, a list appears allowing you to identify which type of accessory device is attached to this input.

4.Press the cursor right again to enter the list of types of devices connected to the selected input.

5.Select the accessory device with the cursor up/down.

Digital Audio

If an accessory device has a digital audio output, you can connect this with a single cable to the TV’s Digital Audio in jack.

In the Source menu, assign the Digital Audio in to the corresponding exernal input to which your accessory device is connected

The TV can output Digital audio via the DIGITAL AUDIO OUT connector to an external amplifier or receiver.

If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a single cable to the TV’s DIGITAL AUDIO OUT.

See To make Video and Audio connections, Digital Surround receiver, p. 49.

Settings
Setup	Clock
Preferences	Auto clock mode
Source	Auto clock channel
Clock	Time
	Day
	Time zone
	Daylight saving
Info

Set your clock

This allows you to use your TV as a clock.

Note:Adjusting the clock is necessary for the correct working of Lock after (See TV settings, Channels, p. 30) features.

Auto clock mode

1.Select Clock in the Setup menu.

2.Press the cursor right to select the Auto clock mode.

3.Press the cursor right to instruct the TV to get the time automatically or manually.

Note: Most of the TV channels are not transmitting clock information.There are few cable channels but they are at the end of the channel ring.There is no clock transmission in antenna channels. In such cases either clock extraction is taking a long time or there is no clock.

22