Philips 42-50-63PF9631D/37 Side panel overview, Camera, Camcorder, Game, Headphone, Mm jack

To make video and audio connections (Continued) EN

Notes:

-Cables are often color-coded to connectors. Connect red to red, white to white....

-Component video (YPbPr) connection is necessary to view video sources, for example digital broadcastings coming from a settop box, in 1080i, 720p, 480i or 480p;

-The labels for the component video sockets may differ depending on the DVD player or the device connected. Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player’s or devices instructions for use for definitions and connection details;

-This television is designed to accept high definition signal standards 480p, 720p and 1080i as specified by the Electronic Industries Association standard EIA770.3.

Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.

Side panel overview

2

3 1

USB

Camera, Camcorder, Game

1.Connect your camera, camcorder or game as shown.

2.Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3.

S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEOinput 1 and AUDIO inputs 3.

Warning: do not connect cable 1 and 2 at the same time.This may cause picture distortion !

Headphone

1.Insert the plug into the headphone socket L as shown.

2.The headphone impedance must be between 8 and 4000 Ohm.The headphone socket has a

3.5 mm jack.

In the Sound menu select Headphone volume to adjust the headphone volume.

Tip: Press ¬ on the remote control to switch off the internal loudspeakers of the TV.

USB

See Multimedia browser, p. 35.

39