Philips 46PFL5705D user manual Use your TV, Switching your TV on or to standby, Switching channels

5 Use your TV

This section helps you perform basic TV operations.

Switching your TV on or to standby

To switch on

•Press .POWER at the side of the TV or press .(Standby-On) on the remote control.

To switch to standby

•Press .POWER at the side of the TV or press .(Standby-On) on the remote control again.

Note

•Energy consumption contributes to air and water pollution.When the AC power cord is plugged in, your TV consumes energy.Your TV has very low standby power consumption.

Switching channels

Press CHANNEL + / − on the side of the TV. For digital channels, press a number (1 to 999) followed by a dot “•” and then the corresponding sub channel number (1 to 999). e.g. 108.30.

•Press CH + / − or enter a number on the remote control.

•Press PREV. CH to return to the previously viewed channel.

12EN