Philips 40PFL5705D Connecting the TV to the internet using an Ethernet cable, Audio coaxial cable

Connecting a set-top box via a composite connector and analog audio

IN

AUDIO L/R + VIDEO

CABLE

OUT

RF IN

Set-top box

Note

•Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

•When you connect cables, match the cable colors to the connectors on the TV.

Connecting the TV to the internet using an Ethernet cable

LANWAN

1 2 3 4 5

Hub or

broadband router

Ethernet cable

Internet

LAN

Connecting a digital home theater amplifier using a digital
audio coaxial cable	h
	E nglis

OUT

DIGITAL AUDIO

IN

digital home theater amplifier

Note

•Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over Digital Audio Output for certain channels, shows or segments during the broadcast.

Telecommunications

Ethernet cable

equipment (modem, etc.)

Note

•Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment.

•After connecting a Ethernet cable, set up necessary network settings.(For the network setup, refer to ‘Network’ on page 26)

•Do not insert any cable other than a Ethernet cable to the LAN terminal to avoid damaging the unit.

•If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router.

•If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.

•For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

•Do not connect your PC directly to the LAN terminal of this unit.

EN 35