Philips 55PFL5705D, 40PFL5705D Use the demo mode, Use Philips EasyLink, Activate Master EasyLink

Use the demo mode

You can use demonstrations to better understand the features of your TV.

1 Press MENU on the remote control and then use Î/ ï/ Í/ Æ to select [Setup] > [Features] > [Demo]. Also, you can enter the demo mode when you press DEMO .

2 Use Î or ï to highlight a demo, and press OK to start the demo. 3 Follow the on-screen instructions to enjoy the demo.

4 Press MENU to exit.

Use Philips EasyLink

Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. Compliant devices must be connected via an HDMI connector.

One-touch play

When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. For example, when you press ►(play) on your DVD remote control, your TV automatically switches to the correct channel to show the DVD content.

One-touch standby

When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode.You can perform one-touch standby using the remote control from any of the connected HDMI devices.

System audio control

When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device. To use one-touch audio, you must map the audio input from the connected device to your TV.

You can use the remote control from the connected device to adjust the volume.

Remote control (RC) key forwarding

RC key forwarding allows you to control EasyLink-compliant devices using your TV remote control.

Activate Master EasyLink

1 Press MENU on the remote control and then use Î/ ï/ Í/ Æ to select [Setup] > [Installation] > [Preferences] > [EasyLink] > [Master EasyLink].

2 Use Î or ï to select [On].

Note

•Select [Off] to disable this function.

•Philips does not guarantee 100% interoperability with all HDMI CEC devices.

•The EasyLink-compliant device must be switched on and selected as the source.

[Master EasyLink] must be activated in the [Preferences] menu to make the [TV Speakers] menu available in the [Sound] menu.

EasyLink

This function allows you to operate the linked functions between our brand devices with EasyLink capabilities and this unit connected via a HDMI cable.

1 Press MENU on the remote control and then use Î/ ï/ Í/ Æ to select [Setup] > [Installation] > [Preferences] > [EasyLink].

Location	MastMasterer EEasyLinkasyLink		On
EasyLink	Auto TV On	•	On
	RC Key forwarding	•	Select
	Device List	•	Select
		•
		•
		•
		•

2 Use Î or ï to highlight the desired setting and then press OK to select the setting.

3 Adjust the following items.

[Master EasyLink]

Set the EasyLink [On] or [Off].

The following additional settings will disappear when you set to [Off]. Use Î or ï to select the desired option, then press OK.

Off	Disable all EasyLink.
On	Select if you have connected an external device that
	is compatible with the EasyLink function.

[Auto TV On]

Use Î or ï to select the desired option, then press OK.

Off	This unit stays off even if you turn on your connected
	EasyLink device.
On	This unit turns on automatically when you turn on
	your connected EasyLink device.

[RC Key forwarding]

Use Î or ï to select the desired option, then press OK.

Select enable or disable RC key forwarding if this HDMI1 to HDMI4 unit connected through HDMI1 to HDMI4 to your

EasyLink devices.

[Device List]

This function lets you see the product name of connected devices. Use Î or ï to select the desired HDMI device listed on the TV screen, then press OK.

4 Press MENU to exit.

E nglish

EN 25