Connecting a PC
If you connect a PC with a VGA connector at the back.
Add devices
After connecting devices, assign the device attached to each connector. This allows you to easily identify devices connected to your TV.
1 Press MENU on the remote control and then use Î/ ï/Í/ Æ to select [Add new devices].
2 Use Í or Æ to select [Start], then press OK.
| AUDIO |
| IN |
IN | VGA |
AUDIO
OUT
PC
OUT
3 Use Î or ï to select a device and press OK.
4 Use Î or ï to select the connector your device is connected to and press OK.
5 If there is video and audio output, press OK.
Repeat the procedure until all devices are correctly assigned to connectors.
Remove devices
If a device is no longer connected to the TV, remove it from the home menu.
1 Press MENU on the remote control.
If you connect a PC with a
HDMI 1 IN only |
2 Use Î/ ï/Í/ Æ to select a device to remove.
3 Press OPTIONS.
4 Use Î or ï to select [Remove device], then press OK. 5 Use Í or Æ to select [OK], then press OK.
AUDIO 
IN
DVI OUT
AUDIO PC OUT
If you connect a PC with an HDMI connector.
IN
OUT
HDMI
PC