Philips 32HFL3350D, 22HFL3350D manual Set auto scart, Set USB break-in, Select monitor out

•Time download

Set the time of the clock display automatically via Teletext.The clock will be automatically synchronised to the correct time.

•Download Program

Select the time from the teletext transmission of a channel. Make this download program the same as the startup channel.

•Time offset

Set the time difference between the time received from Teletext to the current time at your location.

•Buzzer volume

Set the volume of the alarm buzzer.

7.Press ï to select Store - go right and press Æ to save setting.

7.12 Set auto scart

Set the TV to switch to the source where scart signal is detected.

1.Enter Setup menu.

2.Press ï to select Auto scart.

Setup menu		Auto scart
Maximum volume	100	AV1
Switch on channel		Power ON SCART
Power on		Off
Low power standby
Clock
Auto scart
USB break-in
Monitor out

3.Press Æ to enter Auto scart.

4.Press Î or ï to select the desired option.

•AV1

Select to switch TV automatically to AV1 when scart cable is connected to the AV1 connector.

•Power ON SCART

Select to switch the TV on from standby

mode when a scart signal is detected or
when no scart signal is detected the TV will	EN
go to standby mode.
• Off
Switch off this feature.

5.Press ï to select Store - go right and press Æ to save setting.

7.13 Set USB break-in

Set the TV to automatically detect USB devices.

1.Enter Setup menu.

2.Press ï to select USB break-in.

Setup menu	USB break-in
Switch on channel	On
Power on	Off
Low power standby
Clock
Auto scart
USB break-in
Monitor out
Blank current Channel

3.Press Æ to enter USB break-in.

4.Press Î or ï to select the desired option.

•On

Enable plug and play auto detection of USB devices.

•Off

Disable plug and play auto detection of USB devices.

5.Press ï to select Store - go right and press Æ to save setting.

7.14 Select monitor out

Select to output audio and video from TV via relevant AV connectors.

1.Enter Setup menu.

2.Press ï to select Monitor out.

EN-21