Philips 22HFL3350D manual Trouble shooting, Communication issues, Picture issues, Other issues

Page 26

9	Trouble shooting	• Check that the remote control is not
This section describes commonly-encountered		locked. See Section 7.4 Select remote control
This section describes commonly-encountered		setting for details.
issues and accompanying solutions.

9.1Communication issues

The TV does not communicate with external interactive terminal:

•Check that the card slot is enabled. See Section 4.6.2 Access CAM services for details.

9.2Picture issues

No picture

•Check that the Blank current channel feature is not switched on. See Section 7.16 Select blank current channel for details.

9.3Other issues

The character 'F' appears on the TV screen.

This means that the TV is currently in factory mode.

•Press and hold the MENU button at the side of the TV for a few seconds.This will reset the TV to normal operation.

No respond from TV when using guest mode remote control.

This means that high security mode has been set to On.

•Select Setup menu > Remote control. Set High security mode to Off.

BDS mode not working.

•Check that the mode is not switched on. Switch the TV off and on to reset.

Remote control does not work

•Check that the batteries are not faulty. EN-24

Image 26

Contents Philips Professional and Business Solution Page Table of contents Koninklijke Philips Electronics N.V. All rights reserved WarrantyPixel characteristics arranty! Never attempt to repair the TV yourselfRefit the fuse cover Mains fuse UK onlyRemove fuse cover and fuse CopyrightEN-4 SafetyRisk of electric shock or fire Recycling Unplug the TV before cleaningScreen care Never allow children to climb on or play with the TVYour TV Connection overviewMenu PowerCommom Interface For setup and configuration purposes Remote controlGuest mode remote control Setup remote controlWall mount the TV Get startedPosition the TV BbwarningConnect the mains cord Insert the remote control batteriesConnect the antenna cable DdnoteUsing the Conditional Access Module Prepare TV for digital servicesRemove the batteries if not using Access CAM services Enter Setup menuPress Menu or M to exit EN-12 Remote control overview Teletext First time setup EETipSetup BDS mode Access setup menuSwitch on BDS mode Enter Setup menu Select remote control settingVolume +/-,PROGRAM +/- and Remote control lockedSelect OSD display Set maximum volume Set switch on volumeSelect switch on channel Set power on statusSet low power standby Select clock settingsSelect monitor out Set auto scartSet USB break-in Select blank current channel Save settingsEnter Setup menu Press ï to select Blank current Channel Press Æ to enter Blank current ChannelFrom TV to Cloning Clone configurationFrom Cloning to TV Picture issues Trouble shootingCommunication issues Other issuesIndex Side Controls EN-26 Setup 18 Power IndicatorScreen care SERV. U Setup Menu Page Koninklijke Philips Electronics N.V. All rights reserved