Philips 22HFL3350D, 32HFL3350D manual Safety, Risk of electric shock or fire, EN-4

Page 6

1 Important

Read and understand all instructions before

you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply.

1.1Safety

Risk of electric shock or fire!

Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips to have the TV checked before use.

Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight.

To prevent the spread of fire, keep candles or other flames away from this product at all times.

Never insert objects into the ventilation slots or other openings on the TV.

When the TV is swivelled, ensure that no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing.

Risk of short circuit or fire!

Never expose the remote control or batteries to rain, water or excessive heat.

Avoid force coming on the power plugs. Power plugs that are partly loosened can cause arcing or fire.

Risk of injury or damage to the TV!

Two people are required to lift and carry a TV that weighs more than 55 lbs.

If you stand mount the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and stand.

The TV must be mounted on the wall bracket designed for this TV, and on a wall that can safely hold the weight of the TV. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident or injury.

Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children:

Never place the TV on a surface covered by a cloth or other material that can be pulled away.

Ensure that no part of the TV hangs over the edgge of the mounting surface.

Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to a suitable support (such as a concrete wall).

Educate children about the dangers of climbing on furniture to reach the TV.

Risk of overheating! Never install the TV in a confined space such as a bookcase. Always leave a space of at least four inches around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV.

Risk of injury, fire or power cord damage! Never place the TV or any objects on the power cord.

Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.

EN-4

Image 6
Contents Philips Professional and Business Solution Page Table of contents Koninklijke Philips Electronics N.V. All rights reserved WarrantyPixel characteristics arranty! Never attempt to repair the TV yourselfRefit the fuse cover Mains fuse UK onlyRemove fuse cover and fuse CopyrightSafety Risk of electric shock or fireEN-4 Recycling Unplug the TV before cleaningScreen care Never allow children to climb on or play with the TVYour TV Connection overviewPower Commom InterfaceMenu For setup and configuration purposes Remote controlGuest mode remote control Setup remote controlWall mount the TV Get startedPosition the TV BbwarningConnect the mains cord Insert the remote control batteriesConnect the antenna cable DdnoteUsing the Conditional Access Module Prepare TV for digital servicesRemove the batteries if not using Access CAM services Enter Setup menuPress Menu or M to exit EN-12 Remote control overview Teletext First time setup EETipSetup BDS mode Access setup menuSwitch on BDS mode Enter Setup menu Select remote control settingVolume +/-,PROGRAM +/- and Remote control lockedSelect OSD display Set maximum volume Set switch on volumeSelect switch on channel Set power on statusSet low power standby Select clock settingsSet auto scart Set USB break-inSelect monitor out Select blank current channel Save settingsEnter Setup menu Press ï to select Blank current Channel Press Æ to enter Blank current ChannelClone configuration From Cloning to TVFrom TV to Cloning Picture issues Trouble shootingCommunication issues Other issuesIndex Setup 18 Power Indicator Screen care SERV. U Setup MenuSide Controls EN-26 Page Koninklijke Philips Electronics N.V. All rights reserved