8 Clone configuration
8.1From Cloning to TV
Copy TV configuration data from a USB stick to TV.
1.Insert the USB stick to the USB connector at the side of the TV.
2.Enter Setup menu.
3.Press ï to select Cloning to TV.
4.Press Æ to enter Cloning to TV.
5.Press Æ to load data to the TV. During this process, the cloning files.
Setup menu | Cloning to TV |
Clock | Load |
Auto scart | |
USB | Done |
Monitor out |
|
Blank current Channel |
|
Store - go right |
|
Cloning to TV |
|
TV to Cloning |
|
DDNote
•During the process of copying, do not remove the USB stick.
•All remote control command and control buttons on the TV are disabled.
6.Switch off and then on to reset the TV after cloning.
8.2From TV to Cloning
Copy TV configuration data from TV to USB stick.
1.Enter Setup menu.
2.Press ï to select TV to Cloning.
3.Press Æ to enter TV to Cloning.
4.Press Æ to load data to the USB stick.
Setup menu | TV to Cloning |
Clock | Load |
Auto scart | |
USB | Done |
Monitor out |
|
Blank current Channel |
|
Store - go right |
|
Cloning to TV |
|
TV to Cloning |
|
DDNote
•During the process of copying, do not remove the USB stick.
•All remote control command and control buttons on the TV are disabled.
5.Switch off and then on to reset the TV after cloning.
EN