DOD FX7 owner manual Getting Started, Supplying Power

Page 6

signal processing

SECTION 1 - GETTING STARTED

Supplying Power

The FX7, like any piece of computer hardware, is sensitive to voltage drops, spikes, and surges. Interference such as lightning or power "brownouts" can seriously, and in extreme cases, permanently damage the circuitry inside the unit. Here are a few tips that will help you get the best possible performance out of your FX7 while avoiding damage:

•Always make sure you have a "clean" power source for connect- ing to the FX7. This means that the AC power line you connect to the FX7 should be as free from voltage fluctuations and RF interference as possible. In recording environments, "clean" power is also important in preventing AC hum or buzz from get- ting to tape.

•Use a good quality spike / surge suppressor (also called a power strip). This is an inexpensive solution to all but the most severe AC line conditions. A good quality power strip can save you a lot of money in repair bills because they prevent large spikes and surges from reaching your equipment. Also in this category (but more expensive) are rackmount power supplies. Some of these, like the DOD 828, have retractable light tubes and RF filtering.

•Although more expensive, AC line conditioners offer the best protection from improper line voltages. Line conditioners con- stantly monitor the AC line for excessively high or low voltages and instantaneously compensate to deliver a consistent voltage to the connected equipment.

•Always make sure that your audio lines are as far as possible from power cables. This will further prevent noise, hum, and stray magnetic fields from entering your signal path. If audio and power lines must run close to each other, try to avoid run- ning them parallel to one another.

4

FX7 owner's manual

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Guitar Effects PROCESSOR/PREAMP Safety Instructions European Signal processing About the Pictorial Guide Indicators WarrantyIntroduction Signal processing Supplying Power Getting StartedEffect Selector Buttons Digital FX- This row of but Program and Bank Selector FOOTSWITCHES- TheseFront Panel Controls Effect Selector Buttons Preamp This row of fourRear Panel Connections Do not Apply Power to the FX7 Until Instructed Hooking UpProgramming the FX7 Navigating The FX7 Using The FootswitchesTo select Programs using the footswitches To select Programs in the FX7Editing Programs To store a Program into a memory location Storing ProgramsBypassing To bypass individual effectsUsing a Controller With The FX7 Word About Mono OperationTo bypass the selected Program About the FX7s Effects EqualizersMono Delays Specifications Factory Program ListFX7 Block Diagram FX7 is a registered trademark of DOD Electronics Corporation

FX7 specifications

The DOD FX7 is a versatile and innovative guitar effects pedal that has made a significant impact in both live performances and studio recordings. Launched as part of the DOD series, the FX7 is known for its user-friendly interface and a wide array of tonal possibilities, making it a favorite among genre-spanning musicians.

One of the standout features of the FX7 is its extensive collection of effects. The pedal includes nine different effects settings, ranging from classic distortion and overdrive to lush chorus and vivid flanger. This enables guitarists to achieve a diverse palette of sounds suitable for various musical styles, from rock to blues to jazz.

The FX7 utilizes an advanced digital signal processing (DSP) technology that ensures high-quality sound reproduction and low noise levels. This technology allows musicians to incorporate complex effects without deteriorating the original tone of the instrument. Additionally, the FX7’s analog circuitry complements its digital components, enriching the overall sound and providing warmth that many players seek.

Ease of use is another defining characteristic of the DOD FX7. The pedal features a straightforward layout with clearly labeled knobs for adjusting the level, tone, and effect parameters. This allows musicians to make quick adjustments during performances, ensuring they can switch between settings seamlessly without interrupting the flow of their music.

Moreover, the FX7 offers a robust build quality, designed to withstand the rigors of touring and frequent use. The pedal's durable casing protects the internal components from physical damage, while the footswitch is engineered for responsive engagement, allowing for reliable performance under pressure.

Another notable technology embedded in the FX7 is its true bypass circuitry. This feature ensures that when the pedal is not engaged, the guitar signal remains unaltered, preserving the natural tone of the instrument without adding unwanted noise or coloration.

In summary, the DOD FX7 is a dynamic and feature-rich effects pedal that stands out in the competitive world of guitar effects. Its combination of diverse effects, advanced technology, ease of use, and rugged design makes it a crucial tool for both amateur and professional musicians seeking to expand their sonic horizons. Whether on stage or in the studio, the FX7 proves to be a reliable partner in creativity.
Top Page Image Contents