Philips 22PFL3805H user manual Manually adjust picture settings, Change picture format

Manually adjust picture settings

1Press .

2Press to select [Setup] > [Picture].

3Press to select the following settings.

•[Smart picture]: Accesses pre-defined smart picture settings.

•[Video contrast]: Adjusts the intensity of video contents, keeping backlight unchanged.

•[Contrast]: Adjusts the intensity of backlight areas, keeping video contents unchanged.

•[Brightness]: Adjusts the intensity and details of dark areas.

•[Colour]: Adjusts colour saturation.

•[Hue]: Compensates for colour variations.

•[Sharpness]: Adjusts sharpness in the image.

•[Noise reduction]: Filters and reduces noise in an image.

•[Tint]: Adjusts the colour balance in an image.

•[Custom tint]: Customises tint setting. (Only available if [Tint] > [Custom] is selected)

•[Digital Crystal Clear]: Fine-tunes each pixel to match surrounding pixels. This produces a brilliant, high-definition image.

•[Dynamic contrast]: Enhances contrast. A [Medium] setting is recommended.

•[Dynamic backlight]: Adjusts brightness of the TV backlight to match lighting conditions.

•[MPEG artifact reduction]: Smoothes out transitions on digital pictures. You can switch this feature on or off.

•[Colour enhancement]: Makes colours more vivid and improves the details in bright colours. You can switch this feature on or off.

•[PC mode]: Adjusts the picture when a PC is connected to the TV via HDMI or DVI.

•[Picture format]: Changes the picture format.

•[Picture size]: Adjusts the viewing area. (when set to maximum, you might see noise or a rough edge of an image.)

•[Horizontal shift]: Adjusts the picture horizontally for PC-VGA, DVI, HDMI or YPbPr.

•[Vertical shift]: Adjusts the picture vertically for PC-VGA, DVI, HDMI or YPbPr.

Change picture format

1Press .

» A picture format bar appears.

2Press to select a picture format.

»The selected picture format is activated.

3Press OK to confirm your choice.

English

EN 19