Manually install channels
This section describes how to search and store analogueTV channels manually.
Step 1 Select your system
Note
•Skip this step if your system settings are correct.
1Press 
.
2Press 
to select [Setup] > [Installation] > [Channel installation] > [Analogue: manual install].
»The [Analogue: manual install] menu appears.
3Press 
to select [System], then press 
to enter.
4Press 
to select your country or region.
5Press OK to confirm.
6Press 
to return to [Channel installation] menu.
Step 2 Search and store new TV channels
1Press 
.
2Press 
to select [Setup] > [Installation] > [Channel installation] > [Analogue: manual install].
»The [Analogue: manual install] menu appears.
3Press 
to select [Search], then press 
to enter.
4Press 
to manually enter the three- digit frequency.
5Press OK to begin search.
»If a channel is unavailable at the selected frequency, press OK to search for the next available channel.
6Press BACK when the new channel is found.
7Press 
to select [Store as new channel] to store the new channel under a new channel number.
8Press OK to enter [Store as new channel], then press OK.
9Press 
to return to the [Channel installation] menu.
Step 3 Fine-tune analogue channels
1Press 
.
2Press 
to select [Setup] > [Installation] > [Channel installation] > [Analogue: manual install].
»The [Analogue: manual install] menu appears.
3Press 
to select [Fine tune], then press 
to enter.
4Press 
to adjust frequency.
5Press OK to confirm.
6Press 
to select [Store current channel] to store the channel number.
7Press 
to enter [Store current channel], then press OK.
8Press 
to return to the [Channel installation] menu.
34EN