Connect the antenna cable
Connect the antenna cable to the TV antenna socket (75 
) at the back of the TV.
Cable
The location of the power connector varies according to TV model.
2 Insert the power cord fully into the power connector.
Connect the power cord plug to the power outlet. Ensure that the cord is tightly secured at both ends.
Disconnect the TV from the power
Caution
Pull the power cord by the plug; do not pull on the power cord.
1 Unplug the power cord from the power outlet.
2 Unplug the power cord from the power connector at the back of the TV.
Connect the power cord | Insert the remote control |
| batteries |
Warning
Verify that your mains voltage corresponds with the voltage printed at the back of the TV. Do not insert the mains cord if the voltage is different.
1 Locate the power connector at the back of the TV.
1 Slide the battery cover off the back of the remote control.
2 Insert the two supplied batteries (AAA). Be sure the + and - ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
Note
Remove the batteries if not using the remote control for an extended period of time.
10EN